DBTLAP Laptop Fan for Toshiba Qosmio X300 X305-Q701 CPU Cooler
Replacement CPU cooler for Toshiba Qosmio X300 and X305 series laptops
- Accessory categoryCooler
- Cools compatible Toshiba Qosmio models effectively
- Tested individually to ensure 100% operation
- Replaces part numbers KSB0705HA 8604W6R AB0905HX-S03
- Supplied as a single ready-to-fit fan unit
- Produced by Forcecon, ADDA, Sunon or Kipo
Replacement CPU Fan for Toshiba Qosmio X300
This new cooling fan replaces the original CPU cooler in Toshiba Qosmio X300 and X305-Q701 laptops. It matches part numbers KSB0705HA, 8604W6R and AB0905HX-S03. Each unit is tested individually before shipping to ensure it operates correctly. The package includes one fan ready for installation.
Upgrade from a Failed or Noisy Stock Cooler
The jump is worth it when the original fan has stopped spinning, runs loudly or causes the system to overheat and throttle. It restores the factory cooling performance for the listed Qosmio models including X300-11S, X300-11W, X300-12H, X300-16C and X300-16D. Buyers who need a different form factor or a universal external pad should look elsewhere.
Fits Directly into the Existing Laptop Chassis
The fan mounts using the original screw points and connects to the motherboard header without adapters. It frees up the internal thermal path so the CPU can maintain its rated speed. Verify the part number against your current fan before purchase, as manufacturers such as Forcecon, ADDA, Sunon or Kipo may be supplied depending on stock.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 90% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
Does this cooler fit the Toshiba Qosmio X300-11S mounting holes?
It is built for the X300 series including the X300-11S, X300-11W, X300-12H, X300-16C and X300-16D models so the screw pattern matches those chassis.
What is the installation step people often miss when swapping the CPU fan?
Remove the old thermal compound completely, apply a thin fresh layer on the CPU die, then secure the new fan using the original four screws in a cross pattern.
When should the replacement fan be cleaned or swapped again?
Clean the heatsink fins with compressed air every six months; expect to replace the fan after roughly three years of daily use when bearing noise appears.
More in Laptop Cooling Stands & Fans
Similar items
The Perfect Part USB 3 Fan Laptop Cooling Pad Clear
- Cooler
- Notebook
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
Lemincrash L25584-001 CPU Cooling Fan 4 Wires
- Cooling Fan & Heats…
- Notebook
Lemincrash EG50050S1-C030-S9A laptop cooling pad 4-Line .40A
- Cooler
- Notebook





