DBTLAP PAAD07010SH 0.43A 5V 4PIN CPU Fan MSI GS32
A 0.43 A, 5 V four-pin CPU cooling fan for MSI GS32 laptops, supplied new and tested before shipping
- Accessory categoryCooler
- Direct replacement for MSI GS32 MS-13F2
- 5 V DC operation at 0.43 A draw
- Four-pin PWM connector enables speed control
- Part number PAAD07010SH matches OEM spec
- Unit tested before shipping for reliability
DBTLAP PAAD07010SH Replacement Fan
This new DBTLAP PAAD07010SH cooling fan is built for the MSI GS32 MS-13F2 laptop series. It draws 0.43 A at 5 VDC and connects through a four-pin header. The part number N349 matches the original specification. Buyers who need a different connector layout or voltage should look elsewhere.
Fits MSI GS32 Cooling Assembly
The fan slots into the existing CPU thermal module without adapters or soldering. A four-pin PWM header supplies power and speed control directly from the motherboard. No external power brick or software utility is required. Installers must verify the old unit matches the product photos before fitting.
0.43 A 5 VDC Thermal Headroom
At the rated 0.43 A the fan delivers the airflow the GS32 heatsink was designed for. It keeps the processor within its thermal envelope during typical workloads. Sustained heavy loads that exceed the original cooling capacity will still throttle the CPU. Each unit is tested before shipping.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $50.99
- Pricier than about 90% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
Will the 0.43 A 5 V fan keep up during long gaming sessions on my GS32?
The fan draws 0.43 A at 5 V, matching the original MSI GS32 specification so it maintains the same airflow envelope under sustained load.
How much noise and heat does the 4-pin PAAD07010SH add when running all day?
It connects to the motherboard 4-pin header, allowing PWM speed control that keeps acoustic output and case temperature at stock levels.
What must my MSI GS32 already have for this N349 fan to install directly?
Your GS32 MS-13F2 needs the original 4-pin CPU fan header and the mounting points shown in the product photos.
More in Laptop Cooling Stands & Fans
Similar items
Thermaltake Massive V20 200mm Blue LED Laptop Cooling Pad 10-17
- 7 in (17.8 cm)
- Blue
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
ENHANCE ENGXC10100RDEW Cryogen 5 laptop cooling pad Red
- 7 in (17.8 cm)
- Red
Craftreasure Turbo Cooling-One Key Switch laptop cooling pad
- 10.24 in × 8.66 in…
- Grey





