Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects one 4-pin Molex supply lead to four 3-pin or 4-pin fans with 12 V power over a 27 cm sleeved cable
This 12 V adapter converts a single four-pin Molex connector into four three-pin or four-pin fan headers. The 27 cm black-sleeved cable uses 22 AWG wiring and is intended for desktop power supplies that lack enough native fan plugs. It draws power directly from the PSU so every attached fan runs at full voltage. No PWM signalling is passed through the splitter.
Suits anyone adding multiple case or radiator fans to a supply with spare Molex leads but insufficient three-pin or four-pin headers. Not for users who require motherboard-controlled fan curves, because the cable does not forward PWM speed signals. Buyers wanting voltage regulation or software fan profiles should look at a powered hub or a motherboard splitter instead.
Push the Molex end into any free peripheral connector on the power supply, then attach up to four fans to the three-pin or four-pin sockets. The keyed plugs prevent reversed insertion. The only common issue is expecting automatic speed control; the fans will spin at 12 V continuously unless the motherboard or a separate controller regulates them.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Yes, the cable connects a single 4-pin Molex output from your PSU to four 3-pin or 4-pin fan headers, so you can power multiple fans from one connector.
The four output ports accept both 3-pin and 4-pin fan plugs, so your older 3-pin fans will fit and receive power without any adapter.
When the system is on, each connected fan should spin immediately; if a fan stays still, reseat its plug into the splitter port to ensure a firm connection.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?