Total Micro Technologies W2F74AA-TM 150W power adapter
- Others
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts 100 to 240 volt AC to 12 volt DC at up to 5 amps with a 5.5 by 2.5 mm barrel plug for LED strips, CCTV cameras and similar 12 volt equipment
This Dell branded power adapter converts AC 100-240V mains electricity into a regulated 12V DC output at up to 5A, delivering a maximum of 60W. It is intended for indoor equipment such as LED strip lights, CCTV cameras, routers and similar 12V devices that use a 5.5×2.5mm barrel connector.
The unit includes over-temperature, over-current, over-voltage and short-circuit protection to maintain stable operation. A flicker-free DC output helps prevent visible ripple on LED lighting. The supplier suggests operating at no more than 80% of the rated load for continuous use.
This adapter replaces lost or failed 12V supplies rated at 1A, 2A, 3A or 4A, provided the device uses a 5.5×2.5mm or 5.5×2.1mm plug with centre-positive polarity. It is not suitable for equipment that draws more than 5A or requires a different output voltage.
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Product type | 9 V |
| Adapter type | USB C Charger |
| Ports & slots | |
| First connector | 5.5 × 2.5 mm Barrel Connector |
| Second connector | 5.5 × 2.5 mm Barrel Connector |
| Connector type | Male |
| Size & build | |
| Product dimensions | 14.33 in W × 12.83 in H × 9.06 in D |
| In the box | |
| Units per package | 1 |
| In the box | 1 |
Plug the barrel connector into the device with the inner pin positive (+) and outer sleeve negative (−). Confirm the device label shows 12 V DC and a current draw of 5 A or less, then connect the AC cord to a 100–240 V outlet.
Inspect the PVC-jacketed cable for cracks or heat damage periodically. Keep ventilation clear around the brick so the over-temperature protection does not trigger. Replace the unit if output voltage drifts or the connector becomes loose.
The 60 W / 5 A ceiling is the first hard limit; drawing more than 5 A only yields 5 A. The supplier recommends staying at or below 80 % of that rating for sustained operation.
More in AC Adapters & Power Bricks
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?