DELL 2F8RD PowerEdge R240 1-to-4 SATA Cable
Connects four SATA drives in a PowerEdge R240 without hot-swap support
- Product colorBlack
- Connects four SATA drives to the motherboard or backplane
- Non-hot-swappable design for fixed internal storage configurations
- Built for Dell PowerEdge R240 servers without a RAID card
- Black SATA cable ensures reliable internal data connections
- Part number 2F8RD matches Dell factory specifications
Dell PowerEdge R240 SATA cable
This Dell 2F8RD cable connects up to four SATA drives inside a PowerEdge R240 server. It is designed for systems that operate without a RAID card and provides direct data links to the motherboard or backplane. The black cable supports non-hot-swappable drive configurations.
Suited for non-RAID storage expansion
This part fits administrators expanding internal storage on an R240 where a RAID controller is not installed. It is not suitable for hot-swap drive bays or for systems that require RAID-managed arrays. Builders needing hot-plug capability or RAID connectivity should look at alternative cabling solutions.
1-to-4 SATA breakout design
The cable splits a single motherboard or backplane connector into four SATA data ports for multiple drives. This fixed 1-to-4 layout determines how many drives can be attached without a RAID card. Verify that your R240 chassis and drive cage match this non-hot-swappable topology before ordering.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
How many SATA drives can the 1-to-4 cable connect in a PowerEdge R240?
The cable splits one motherboard or backplane port into four SATA data connectors, letting you attach up to four drives inside the R240 chassis.
Does the 2F8RD cable add extra heat or noise when the server runs continuously?
It is a passive internal cable with no active components, so it generates no measurable heat or noise of its own during all-day operation.
What server hardware must already be present for this cable to function?
You need a Dell PowerEdge R240 system without a RAID card, using the onboard SATA controller or backplane that the cable plugs into.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





