Crucial CT32G56C46S5 32GB DDR5 5600 CL46 262-pin SO-DIMM laptop RAM
- 32 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 SO-DIMM laptop memory running at 2400 MHz with 1.20 V operation
This 16GB DDR4 2400 SO-DIMM module is a Dell-branded memory upgrade designed for compatible laptop systems. It operates at 1.20V with an unbuffered, non-ECC layout and uses the standard 260-pin form factor. The module has been qualified through Dell's quality assurance process to ensure full compatibility and support.
This module suits users upgrading a supported Dell laptop that accepts DDR4 SO-DIMMs and requires a 16GB capacity. It is not for systems that only support a different memory generation, a different pin count, or a maximum capacity below 16GB. Buyers needing ECC or registered memory should look elsewhere.
The single specification that decides fit is the 260-pin DDR4 SO-DIMM interface. Only laptops with a matching DDR4 SO-DIMM slot can accept this module; other form factors or memory generations are physically and electrically incompatible.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | A9168727 |
| Total capacity | 16 GB |
| Product type | 260-Pin DDR4 SO-DIMM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Memory | |
| ECC support | No |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.2 V |
This module uses the standard 260-Pin DDR4 SO-DIMM form factor. It fits laptops that accept DDR4 SO-DIMMs running at 1.20V. Check your service manual to confirm the slot type and maximum supported capacity per slot.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click audibly. The step often missed is pressing evenly on both ends until the clips engage fully.
No firmware updates are needed for the memory itself. The module is unbuffered and non-ECC. If you add a second stick later, the system will run both at the lowest common speed or the highest speed the platform allows.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?