Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
18 GB DDR4 ECC registered memory module with CL19 latency for Dell servers
This Dell A9810561 module provides 18GB of DDR4 server memory with CL19 latency. It is built for administrators upgrading compatible Dell PowerEdge systems that require registered ECC DIMMs. The registered design adds a buffer to reduce electrical load on the memory controller, supporting higher capacities per channel.
The registered buffer allows the memory controller to drive more modules without signal degradation, which is essential for dense server configurations. ECC circuitry detects and corrects single-bit errors to protect data integrity in critical workloads. Dell qualification testing verifies compatibility with the target platform firmware and thermal profile.
Installation follows standard DIMM slot procedures: align the notch, press firmly until the retention clips engage, then verify detection in the system BIOS. A frequent issue occurs when mixing registered and unbuffered modules, which prevents the system from posting. Another common problem is populating slots in an unsupported sequence, causing the new capacity to remain unrecognised.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Total capacity | 18 GB |
| Performance | |
| Rated speed | DDR4 SDRAM |
| Memory | |
| CAS latency | CL19 |
| ECC support | ECC |
| Buffer type | Registered |
| Size & build | |
| Shipping weight | 0.45 kg |
| Package size | 25 × 25 × 25 mm |
No, the registered ECC DDR4 modules are solid-state components with no moving parts and do not require scheduled replacement or maintenance once correctly seated in the server.
The primary limit is the fixed CAS latency of 19 cycles, which determines the minimum response time the memory controller can achieve under sustained throughput.
As low-voltage DDR4 registered DIMMs, they draw minimal power and produce only modest heat that standard server airflow handles without additional cooling.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?