DELL Alienware M17xR4 17.3" 3D FHD LCD Ribbon Cable 2JD3N
A genuine Dell 17.3-inch LCD ribbon cable supporting 1920 x 1080 resolution for Alienware M17xR4 models with 3D screens
- Product typeLaptop-computer-replacement-parts
- Genuine Dell part ensures exact fit for Alienware M17xR4
- Built for 3D-enabled 17.3" screens with FHD support
- Carries 1920 x 1080p signal without loss
- Replaces worn or damaged cable to restore display
- OEM design matches original 2JD3N specification
Genuine Dell 17.3" 3D LCD ribbon cable
This genuine Dell replacement part is built for the Alienware M17xR4 equipped with a 3D-enabled FHD display. It restores the video link between the motherboard and the 17.3 inch panel. The cable carries the 1920 x 1080p signal required by the 3D screen. Installers should verify their model has the 3D panel before ordering.
Capacity and headroom for 3D FHD signalling
The ribbon supports the full 1080p resolution used by the 3D FHD panel in the M17xR4. It handles the dual-frame bandwidth that 3D content demands without compression. The part is not compatible with non-3D screens or other laptop models. Builders swapping to a standard 2D panel will need a different cable.
Build quality and daily implications
As an OEM Dell component the cable matches the original routing, connector pitch and length for the M17xR4 chassis. The flexible ribbon folds into the hinge area exactly as the factory unit did. Correct seating of both ZIF connectors is essential to avoid flicker or colour artefacts on the 3D display. No adapters or modifications are required.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 70% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
Will the 17.3" 3D FHD ribbon cable fit my Alienware M17xR4 that currently uses a standard non-3D screen?
This cable is made for the 3D-enabled LCD panel in the Alienware M17xR4; it will not work with a non-3D screen.
How can I confirm the cable is functioning correctly after I install it?
Power on the laptop and verify the 1920 x 1080p 3D display shows no flicker, lines or colour distortion.
Does the package include any mounting brackets, adhesive strips or tools, or must I source them separately?
Only the genuine Dell 2JD3N ribbon cable is supplied; brackets, adhesive and tools are not included.
More in VGA Monitor Cables
Similar items
HANNORD DisplayPort to VGA Cable 6 ft Male to Male Black
- DisplayPort to VGA…
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Tripp Lite P510-006 6 ft VGA cable HD15 male to female
- no type specified
- Black





