DELL HFS480G32FEH-BA10A 480GB 2.5 enterprise SSD
480 GB 2.5-inch SATA mixed-use TLC enterprise SSD compatible with PowerEdge servers
- Interface typeSATA
- SATA interface connects to a wide range of Dell PowerEdge servers
- 480 GB capacity stores operating system and application data
- 5 inch 7 mm form factor fits standard drive bays
- Mixed-use TLC NAND balances read and write endurance
- Tested components with updated firmware ensure reliable operation
Dell 480 GB enterprise SATA SSD
The Dell HFS480G32FEH-BA10A is a 480 GB 2.5-inch enterprise solid-state drive with a SATA 6 Gbps interface. It uses mixed-use TLC NAND in a 7 mm z-height and is designed for server storage workloads.
Suited for Dell PowerEdge servers.
This drive is validated for a wide range of Dell PowerEdge rack, tower and modular servers including R640, R740, R750, R650, R760, T550 and MX740C. Systems without a 2.5-inch SATA drive bay or without Dell firmware support should consider alternative storage.
SATA 6 Gbps interface decides compatibility
The single specification that determines fit is the SATA 6 Gbps interface combined with the 2.5-inch 7 mm form factor; the server backplane must provide a matching SATA connection and physical slot.
How it compares
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
- Price $414.99
- Cheaper than about 77% of the 1,039 comparable items (median $992.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Model name | HFS480G32FEH-BA10A |
| Ports & slots | |
| Interface type | SATA |
Questions about this item
How long will the 480 GB SATA drive sustain mixed-use write workloads before wearing out?
The drive is built with mixed-use TLC flash rated for typical enterprise endurance, so it will sustain heavy daily writes for the warranty period without hitting a wear limit.
What temperature and fan noise should I expect when the SSD runs 24/7 in a PowerEdge server?
The 7 mm SATA SSD has no moving parts and draws little power, so it adds minimal heat and stays silent inside any compatible PowerEdge chassis.
Which drive carrier or caddy do I need to install this 2.5 inch SSD in my PowerEdge server?
Use the standard Dell 2.5-inch hot-plug drive carrier that matches your PowerEdge model; the SSD fits the same bay as any 7 mm SATA drive.
More in Server & Data Center SSDs
Similar items
Crucial P310 4TB 2280 PCIe 4.0 NVMe enterprise SSD
- 4 TB
- 2.5 in (6.35 cm)
HPE P18420-B21 240GB SATA 2.5" enterprise SSD
- 240 GB
- SATA III





