DELL Latitude 2120 LCD Ribbon Cable TouchScreen 71TF0
Genuine Dell OEM replacement ribbon cable connects the touchscreen LCD on Latitude 2120 laptops, part number 71TF0
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit
- Includes digitizer connection for touchscreen function
- Designed specifically for Latitude 2120 models
- Matches Dell part number 71TF0
- Replaces damaged or faulty LCD ribbon cable
Genuine Dell Latitude 2120 Touchscreen LCD Ribbon
This genuine Dell OEM ribbon cable connects the touchscreen-enabled LCD on the Latitude 2120 notebook. It carries the video signal and the digitiser link required for touch input. The part arrives new and matches the component shown in the product imagery.
Suitable for owners repairing a Latitude 2120
Technicians replacing a damaged touchscreen flex on this specific model will find the correct digitiser connector fitted. Builders working on any other laptop, including different Latitude generations, cannot use this cable because the pin-out and connector shape are model-specific.
Dell part number 71TF0 confirms exact fit
The 71TF0 marking identifies the precise ribbon assembly engineered for the 2120 touchscreen panel. Verifying this number against the existing cable or the service manual is the single check that guarantees compatibility before purchase.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 70% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
Does the 71TF0 cable fit a Latitude 2120 with a touchscreen LCD?
Yes, the 71TF0 ribbon cable is built for the Latitude 2120 and includes the digitiser connector required for touchscreen models.
Which connector on the 71TF0 cable is often missed during installation?
The small digitiser flex must be seated in its ZIF socket before the main video ribbon is locked down; skipping it leaves the touch layer dead.
When should the 71TF0 ribbon cable be replaced?
Replace it if the screen flickers, shows lines, or the touch input stops responding after a hinge repair or lid impact.
More in VGA Monitor Cables
Similar items
HANNORD DisplayPort to VGA Cable 6 ft Male to Male Black
- DisplayPort to VGA…
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
TeKit DVI-I 24+5 Male to Dual 15-pin VGA Female Y Splitter Cable
- DVI-I Male To 2 VGA…
- Black





