DELL Latitude 7300 13.3" LCD Video Ribbon Cable WXGAHD 86XR5
Genuine Dell OEM 13.3" LCD video ribbon cable for Latitude 7300 with WXGAHD 1366 x 768 resolution
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit for Latitude 7300
- 3 inch WXGAHD cable supports 1366 x 768 display resolution
- Replaces Dell part number 86XR5 for direct compatibility
- 7 mm pitch connector matches original motherboard interface
- New condition guarantees reliable video signal transmission
Genuine Dell OEM LCD ribbon cable
This is a genuine Dell OEM replacement part for the Latitude 7300 laptop. It carries the video signal between the motherboard and the 13.3 inch WXGAHD display panel. The part number is 86XR5. Buyers who need a different screen resolution or a different laptop model cannot use this cable.
Replaces a damaged or faulty original cable
The cable replaces the factory-fitted video ribbon when it fails due to hinge stress, cracking or connector wear. The jump is worth it when the screen shows artefacts, flicker or no image while an external monitor works. It is not for upgrading the panel to a higher resolution or a touch-enabled assembly.
Direct fit for Latitude 7300 WXGAHD models
Installation requires opening the display lid and disconnecting the old ribbon from both ends. The 2.7 mm pitch connector must align precisely; forcing it bends the delicate pins. Common issues include routing the cable incorrectly so it pinches in the hinge or seating the latch incompletely.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 81% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
Will this 13.3" ribbon cable fit inside the Latitude 7300 display assembly?
Yes, it is built for the 13.3" Latitude 7300 chassis and matches the WXGAHD panel dimensions.
Which connector orientation does the 86XR5 cable use when routing through the hinge?
The 2.7 mm eDP connector plugs into the motherboard first, then the ribbon folds flat along the hinge channel to the panel.
Does the WXGAHD 1366 x 768 cable degrade over time and need periodic replacement?
No scheduled replacement is required; only replace if the ribbon is kinked, the connector pins bend, or the display shows line artefacts.
More in VGA Monitor Cables
Similar items
Kramer Electronics C-BM/BM-3 BNC Coaxial Video Cable 3 ft 75 Ohms
- 1 x BNC Male Video…
- C-BM/BM
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black





