DELL Latitude E5410 14.1" LCD Ribbon Cable DC7TY
Genuine Dell OEM LCD ribbon cable replaces the display connection in Latitude E5410 14.1 inch laptops
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit for Latitude E5410
- 1 inch LCD ribbon cable restores display connection on compatible laptops
- Part number DC7TY matches original component for straightforward replacement
- Supplied new and ready to install in Dell Latitude E5410 systems
- Wistron Fonseca cable design built to Dell specifications for reliable video signal
Genuine Dell Latitude E5410 LCD ribbon cable
This is a genuine Dell OEM replacement cable for the Latitude E5410 laptop. It carries the video signal between the motherboard and the 14.1 inch LCD panel. The part number DC7TY matches the original factory specification. Buyers repairing other Dell models or needing a different screen size connector will not find this cable compatible.
Installation requires full display assembly
Replacing this ribbon involves removing the bezel, hinges and panel to access the fragile flex connector. No active components draw power, so thermals and noise are unaffected by the part itself. The thin flat cable routes through tight hinge channels; careful handling prevents creasing that would cause permanent video artefacts.
Only the cable is included in the package
The shipment contains exactly the ribbon shown in the product image with part markings 50.4GN01.301 REV A01. No screws, adhesive strips, bezel clips or service manual are supplied. Technicians should source mounting hardware separately before starting the repair.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
How do I install the DC7TY LCD ribbon cable in my Latitude E5410 without damaging the fragile connector?
Remove the battery, open the display bezel, disconnect the old cable from the motherboard and LCD panel, then route the new DC7TY cable through the hinge channel and seat both ZIF connectors fully before reassembling.
Will the DC7TY ribbon cable need periodic replacement or maintenance after installation?
The DC7TY cable is a passive ribbon assembly with no moving parts or service intervals; it only requires replacement if physical damage or a display fault occurs.
What is the first limitation that appears when the DC7TY cable is used continuously in a Latitude E5410?
The cable itself has no active limits; sustained use is constrained only by the laptop's thermal design and the LCD panel's operating specifications.
More in VGA Monitor Cables
Similar items
BattleBorn GC-SVGAF-3MM VGA Cable 3 ft Male-to-Male Black
- VGA/SVGA Cable
- 3 ft (0.91 m)
HANNORD VGA to S-Video 3 RCA Cable 7.5 inch Black
- S-Video Cables
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Redpepper VGA cable 15-pin male-to-male 1.5m 1080P gold-plated
- VGA/SVGA Cable
- VGA/SVGA Cable





