DELL Latitude E6420 14" WXGA LCD Ribbon Cable F1P03 1366 x 768
Connects a 14" WXGA LCD panel to a Latitude E6420 motherboard using part number F1P03
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures reliable screen connection
- Designed for 1366 x 768 WXGA HD panels only
- Fits Latitude E6420 14 inch models precisely
- Tested working pull guarantees functional replacement
- Dell part number F1P03 matches service documentation
Genuine Dell Latitude E6420 LCD Ribbon Cable
This genuine Dell F1P03 ribbon cable connects the WXGA-HD display panel in a Latitude E6420 laptop. It is built specifically for 14-inch screens with a native 1366 x 768 resolution. The part is a tested working pull that is guaranteed to function perfectly.
Replaces a Damaged or Faulty F1P03 Cable
Install this cable when the existing ribbon has failed due to hinge stress, liquid exposure or connector fatigue. The jump is worth it if the laptop powers on but the screen shows artefacts, flickering or no image while an external monitor works normally. Compatibility is limited to E6420 models equipped with the 1366 x 768 WXGA-HD panel only.
WXGA-HD Panel Exclusivity Is the Hard Limit
This cable will not work with higher-resolution HD+ or Full HD panels fitted to other E6420 units because the pin-out and signal count differ. Verify the part number F1P03 on the original cable or confirm the screen resolution before ordering. No other Dell models or screen resolutions are supported by this specific ribbon.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 97% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
What screen resolution does this 14-inch ribbon cable support?
It is designed for WXGA-HD panels with a native 1366 x 768 resolution only.
How do I install the F1P03 cable in my Latitude E6420 without damaging the connectors?
Remove the bezel, unlock the ZIF sockets on both the panel and motherboard, insert the ribbon straight, then lock the latches before reassembly.
When should I consider replacing this LCD ribbon cable?
Replace it if the display shows persistent lines, flickering, or no image after confirming the panel and GPU are working correctly.
More in VGA Monitor Cables
Similar items
TeKit VGA Male to Female Coupler Adapter .5 ft 15-pin Black & Dark Blue
- High quality VGA co…
- VGA converter adapt…
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
DELL Latitude E6420 14" LCD Ribbon Cable RCD0V WXGA 1366 x 768
- Laptop-computer-rep…





