DELL Latitude XT CCFL LCD 12.1" Ribbon Cable DR935
Genuine Dell OEM 12.1-inch CCFL LCD ribbon cable, part DR935, for Latitude XT models with CCFL backlight only
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit for Latitude XT
- Designed specifically for 12.1" CCFL backlit LCD screens
- Part number DR935 matches original Dell specification
- Tested and guaranteed to work perfectly
- Not compatible with LED backlit XT systems
Genuine Dell OEM LCD ribbon cable
This is a genuine Dell OEM replacement ribbon cable for the Latitude XT laptop with a 12.1 inch CCFL backlit display. It carries Dell part number DR935 and matches the original factory component exactly.
Thermals noise and power draw
As a passive internal ribbon cable it generates no heat, produces no noise and draws no power during normal operation. It simply transmits video signals between the display panel and the system board.
CCFL backlight compatibility only
This cable works solely with Latitude XT models equipped with CCFL backlit screens and will not function in LED backlit variants. Buyers who need a cable for an LED backlit XT system cannot use this part.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 90% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
How do I install the DR935 ribbon cable on the 12.1" CCFL display without damaging the fragile connector?
Power off the Latitude XT, disconnect the battery, then gently lift the ZIF latch on the LCD panel before sliding the DR935 cable straight in; forcing it at an angle bends the pins and kills the backlight signal.
What part of the DR935 cable tends to fail first after repeated lid cycles?
The folded flex section near the hinge fatigues over time; when the CCFL backlight flickers or shows pink edges, the ribbon has micro-tears and needs replacement.
At what point does the DR935 cable stop carrying a clean signal during continuous use?
Extended heat from the CCFL inverter can soften the adhesive on the flex tail, causing intermittent contact after long sessions; reseating the connector usually restores the picture.
More in VGA Monitor Cables
Similar items
BattleBorn GC-SVGAF-3MM VGA Cable 3 ft Male-to-Male Black
- VGA/SVGA Cable
- 3 ft (0.91 m)
HANNORD VGA to S-Video 3 RCA Cable 7.5 inch Black
- S-Video Cables
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Redpepper VGA cable 15-pin male-to-male 1.5m 1080P gold-plated
- VGA/SVGA Cable
- VGA/SVGA Cable





