DELL PM883a MZ7LH3T8HALTAD3 3.84TB 2.5in SATA enterprise SSD
3.84 TB 2.5-inch SATA enterprise SSD rated at 1 DWPD with 550 MB/s read, 520 MB/s write and power-loss protection
- Total capacity3.84 TB
- Interface typeSATA III
- Form factor2.5 in (6.35 cm)
- Sustained sequential read rate550 MB/s
- Sustained sequential write rate520 MB/s
- Write endurance1 DWPD
- Consistent 550 MB/s reads accelerate database queries
- Stable 520 MB/s writes sustain logging workloads
- 1 DWPD endurance rating supports daily full-capacity rewrites
- 2,000,000-hour MTBF underpins long-term array reliability
- Power-loss protection preserves in-flight data during unexpected outages
Enterprise capacity for mixed workloads
The DELL PM883a MZ7LH3T8HALTAD3 provides 3.84TB of storage in a 2.5in SATA form factor. It targets enterprise servers, storage arrays and workstation computers that need high-capacity solid-state storage for read-intensive applications. The drive uses 3D TLC flash rated at 1 DWPD endurance for consistent daily write cycles.
Steady throughput under sustained load
Sustained sequential read reaches 550 MB/s while sustained sequential write holds at 520 MB/s across the full capacity. The SATA 6Gb/s interface delivers predictable bandwidth for backup, archiving and big-data analytics workloads without the thermal throttling seen in burst-oriented consumer drives. An MTBF of 2000000 hours reflects the design target for continuous operation in data-centre environments.
Standard 2.5in SATA installation
The drive fits any 2.5in bay with a SATA data and power connection, requiring no special brackets or cables. Power-Loss Protection helps preserve in-flight data during unexpected shutdowns, while Native Command Queuing and TRIM Command Support maintain performance over time. Installers should verify that the host controller supports the full SATA 6Gb/s link speed to avoid negotiating down to a slower rate.
How it compares
Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.
- Price $361.99
- Cheaper than about 81% of the 1,039 comparable items (median $992.99).
- Total capacity 3.84 TB
- Higher than about 60% of the 522 comparable items (median 3.2 TB).
- Price per TB $94.27 per TB
- Cheaper than about 94% of the 522 comparable items (median $595.64 per TB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell/Samsung |
| Product line | PM883a |
| Model name | MZ-7LH3T8C |
| Part number | MZ7LH3T8HALTAD3 |
| Total capacity | 3.84 TB |
| Performance | |
| Sustained sequential read rate | 550 MB/s |
| Sustained sequential write rate | 520 MB/s |
| Storage | |
| Write endurance | 1 DWPD |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| More details | |
| Mean time between failures | 2,000,000 h |
Questions about this item
How much heat and noise does the 3.84TB PM883a produce when running continuously?
As a solid-state drive with no moving parts, the 3.84TB PM883a generates minimal heat and operates silently during sustained workloads.
What host interface and physical bay does the MZ7LH3T8HALTAD3 require?
The drive uses a standard SATA 6Gb/s interface and fits any 2.5-inch drive bay with a SATA data and power connection.
Will the PM883a work alongside older SATA mechanical drives in the same array?
Yes, the SATA III interface allows the PM883a to operate alongside legacy SATA HDDs on the same controller or backplane.
More in Server & Data Center SSDs
Similar items
HP 632627-001-R 2.5" 200GB SAS 6Gb/s SLC enterprise SSD
- 200 GB
- SAS 6Gb/s
HPE P40498-B21 960GB 2.5" SATA enterprise SSD
- SATA III
- 2.5 in (6.35 cm)
Solidigm D5-P5336 122.88TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD SBFPFWBV0P12OF1
- 122.88 TB
- E1.L 9.5 mm





