DELL PowerEdge M640 Blade 2x Xeon Platinum 8158 128GB DDR4 2x 300GB SAS
Dual Xeon Platinum 8158 blade server with 128GB DDR4 and two 300GB SAS drives
- ProcessorIntel Xeon
- Installed RAM128 GB
- Type of memoryDDR4 SDRAM
- Processor speed3 GHz
- Installed CPUs2
- Max supported CPUs2
- Dual Xeon Platinum 8158 CPUs deliver 24 cores at 3.0 GHz
- 128GB DDR4 ECC memory supports large virtualisation workloads
- Dual 300GB 10K SAS drives provide fast redundant storage
- PERC H330 RAID controller manages array reliability
- iDRAC9 Enterprise enables remote server management
Ready-to-deploy blade server
The Dell PowerEdge M640 blade arrives with dual Xeon Platinum 8158 processors at 3.0 GHz, 128 GB of DDR4 memory and two 300 GB 10K SAS drives on a PERC H330 controller. Firmware is current and the system has passed full diagnostics.
Suits dense compute clusters; not for GPU workloads
This configuration targets virtualisation hosts, database nodes and HPC clusters that need high core counts in a half-height form factor. The integrated graphics and lack of PCIe accelerator slots rule out GPU-accelerated AI, rendering or VDI deployments.
Dual 12-core CPUs set the performance ceiling
With 24 total cores and 128 GB of DDR4 installed against a 1 TB maximum, the processor complex is the primary scaling limit. Memory can be expanded later, but the socket count is fixed at two.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $929.99
- Cheaper than about 76% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 128 GB
- Typical for this category: the median of 15,103 items is 128 GB.
- Processor speed 3 GHz
- Higher than about 90% of the 9,950 comparable items (median 2.3 GHz).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | Blade |
| Product type | Blade |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 3 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 128 GB |
| Type of memory | DDR4 SDRAM |
| Maximum RAM capacity | 1 TB |
| Storage | |
| Installed storage | 600,00 |
| Disk controller | Dell PERC H330 SAS Storage Controller |
| Drive interface | SAS |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 22 × 22x 10 in |
| More details | |
| Management controller | iDRAC9 Enterprise |
Questions about this item
Does the PERC H330 RAID controller limit the SAS drives to a specific speed?
The controller supports 12 Gb/s SAS signalling, so the two installed 300 GB 10K drives run at their native interface rate.
What physical space does the blade require inside the chassis?
The unit measures 22 x 22 x 10 in and weighs 20 lb, fitting a half-height slot in a compatible Dell enclosure.
How is the blade installed and what step is often missed?
Slide the blade into the enclosure until it locks, then use iDRAC9 Enterprise to complete network and firmware setup before powering on the operating system.
More in Rack & Tower Servers
Similar items
DELL PowerEdge T440 5U rack server 2x Xeon Gold 5120 2.2GHz 14C 16GB DDR4 HBA330 8x 2.5" trays 2x750W PSU
- 5U
- Rack
DELL PowerEdge R730 2U rack server E5-2609v3 1.9GHz 96GB DDR4 2x 900GB 10K SAS H730
- 2U
- Rack
DELL PowerEdge R730 2U rack server E5-2650 v3 10C 2.3GHz 16GB DDR4 2x 300GB 15K SAS H330
- 2U
- Rack





