Silverstone CPS05-RE SFF-8643 36-Pin to SATA 7-Pin x4 Sideband Cable 600mm
- SAS ports: 4
- SAS / SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects the PERC S140 controller to a 4 x 3.5" hot-swap backplane using four Mini SAS HD (SFF-8643) cables for SAS and SATA drives
This cable set links the onboard or PERC S140 RAID controller to the 4x3.5" hot-swap backplane inside a Dell PowerEdge R340 server. It ships as a lot of four genuine Dell VTP09 cables, each terminated with a Mini SAS HD (SFF-8643) connector. The parts are new and intended for IT teams maintaining or populating this specific 340 chassis.
Each cable carries one drive channel, so the set supports the full complement of four 3.5" bays. The SAS/SATA backplane interface means both drive types are electrically compatible, but the cable does not add extra ports beyond the four provided. Builds needing more than four drives or a different backplane layout will require a different cable kit.
The black cables are cut to the exact length Dell specifies for the R340, so they fit the chassis routing channels without slack or tension. Mini SAS HD (SFF-8643) connectors lock securely to the controller and backplane, surviving repeated hot-swap cycles. No adapters or converters are included; the connectors mate directly to the PERC S140 and the 3.5" backplane sockets.
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | PowerEdge R340 |
| Product type | Hot-Swappable SAS Cable Compatible Brand: For Dell |
Yes, the four VTP09 cables are built to link the PERC S140 RAID controller directly to the 4x3.5" hot-swap backplane in the PowerEdge R340 chassis.
Each Mini SAS HD (SFF-8643) connector clicks into the controller and backplane ports; the server BIOS and PERC S140 firmware will then list all attached 3.5" SAS or SATA drives.
The set supplies the four Mini SAS HD (SFF-8643) cables required for the 4x3.5" backplane; mounting hardware for drives or the backplane itself is not included.
More in SAS, SCSI, InfiniBand & MCIO Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?