Dell PowerEdge R540 2U rack server 2x Xeon Silver 4114 2.2GHz 10-core 64GB DDR4 8x 8TB SAS HBA330
2U rack server with dual 10-core Xeon Silver 4114 CPUs, 64GB DDR4 ECC memory, eight 8TB 7.2K SAS drives on an HBA330 controller, dual 1GbE networking, iDRAC9 Enterprise, and redundant 750W PSUs
- ProcessorIntel Xeon
- Installed RAM64 GB
- Installed SSDNo
- Processor core count10-Core Processor
- Operating systemNo
- Type of memoryDDR4
- Dual Xeon Silver 4114 CPUs deliver 20 cores at 2.2 GHz base
- 64 GB DDR4 2666 MHz ECC memory supports virtualization workloads
- Eight 8 TB 7.2K SAS drives provide 64 TB raw capacity
- HBA330 12 Gb/s controller enables direct JBOD pass-through
- iDRAC9 Enterprise gives full remote management with 2× 750 W Platinum PSUs
Dual Xeon 10-core 2U server
The Dell PowerEdge R540 is a 2U rack server equipped with two Intel Xeon Silver 4114 processors, each running at 2.2 GHz with ten cores. It ships with 64 GB of DDR4 registered ECC memory across four modules and a PERC HBA330 storage controller in pass-through mode. Eight 3.5-inch 8 TB SAS hard drives spinning at 7.2K RPM fill the front bays, and dual 750 W platinum power supplies provide redundancy. iDRAC9 Enterprise enables full remote management.
Storage-dense virtualization host
This configuration suits organisations that need high raw capacity in a compact 2U form factor for virtualisation, file serving, or database workloads. The pass-through HBA330 presents drives directly to the operating system, so software-defined storage or ZFS can manage redundancy. Buyers who require hardware RAID with cache-backed write acceleration should consider a server fitted with a PERC RAID controller instead.
HBA330 pass-through and iDRAC9 Enterprise
The HBA330 controller exposes all eight SAS or SATA drives without abstraction, letting the OS handle mirroring, parity or tiering. iDRAC9 Enterprise adds a dedicated management port, virtual console, automated deployment scripts and full power-cycle control from anywhere. Together they remove the need for a separate KVM or out-of-band appliance and simplify large-scale firmware updates across a rack.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,018.99
- Typical for this category: the median of 17,640 items is $1,910.99.
- Installed RAM 64 GB
- Lower than about 70% of the 15,103 comparable items (median 128 GB).
- Processor core count 10-Core Processor
- Lower than about 85% of the 7,955 comparable items (median 16).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | R540 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 10-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.2 GHz |
| Processor details | Silver 4114 |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 1 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Installed storage | 8 × 8 TB 7.2K SAS |
| Disk controller | Dell Perc HBA330 Controller |
| Drive interface | SAS |
| Supported RAID levels | None |
| Connectivity | |
| Network controller | 1x Dell EMC Integrated Dual Port Network Daughter Card - 2x 1 Gigabit RJ45 Ports, |
| Ports & slots | |
| Network ports | 2 x Ports |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 2U |
| Software | |
| Operating system | No |
| More details | |
| Management controller | Dell EMC 14G PowerEdge iDRAC 9 Enterprise License |
Questions about this item
What rack hardware must I already have to install this 2U server?
The server includes rails and a bezel for mounting in a standard rack cabinet.
Will the installed PERC HBA330 controller work with my existing SATA drives?
The HBA330 supports both SAS and SATA drives in pass-through mode for direct drive access.
How can I verify the dual Xeon Silver 4114 processors are running at their 2.2 GHz base speed after setup?
Check CPU frequency in the iDRAC 9 Enterprise interface or the system BIOS during boot.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R740 2U Rack Server 1x Gold 6132 14C 64GB 2x 800GB SAS SSD H730P
- Intel
- 64 GB
DELL PowerEdge R640 10B 2x Xeon Platinum 8160 2.1GHz 512GB DDR4
- Platinum 8160
- LGA3647
DELL PowerEdge R640 4LFF 2x Xeon Gold 6226R 128GB DDR4 No Drive Rack Server
- Xeon
- 2.9 GHz





