DELL PowerEdge R630 10SFF 2x Xeon E5-2667v3 512GB DDR4
1U rack server with ten 2.5-inch drive bays, dual Xeon E5-2667v3 CPUs at 3.2GHz and 512GB DDR4 memory
- ProcessorIntel Xeon
- Installed RAM512 GB
- Type of memoryDDR4
- Processor speed3.2 GHz
- Installed CPUs2
- Max supported CPUs2
- Dual Xeon E5-2667v3 at 3.2GHz delivers high single-thread speed
- 512GB DDR4 ECC memory supports large virtualisation workloads
- 10 × 2.5" drive bays with PERC H730 SAS controller enable flexible storage
- iDRAC8 Enterprise licence provides full remote management
- 2 × 495W redundant power supplies maintain uptime
Server configuration
This Dell PowerEdge R630 rack server arrives with two Intel Xeon E5-2667v3 processors running at 3.2GHz and 512GB of DDR4 ECC registered memory. The 10-bay 2.5-inch chassis uses a PERC H730 SAS controller for storage connectivity. Integrated graphics and dual 495W power supplies complete the base platform.
Sustained operation
Dual processors and a large memory pool allow the system to maintain throughput during extended virtualisation or database workloads. The H730 controller supports RAID levels that protect data during continuous write activity. Remote management through iDRAC8 Enterprise enables monitoring and firmware updates without physical access.
Pre-purchase checks
Verify that your rack provides 36 inches of depth and can support 40 units of weight for this 1U form factor. Confirm the facility can supply redundant power circuits for the two 495W supplies. Plan to source 2.5-inch SATA or SAS drives separately because no storage devices are installed.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $1,743.99
- Typical for this category: the median of 17,640 items is $1,910.99.
- Installed RAM 512 GB
- Higher than about 80% of the 15,103 comparable items (median 128 GB).
- Processor speed 3.2 GHz
- Higher than about 92% of the 9,950 comparable items (median 2.3 GHz).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | Rack Mount |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 3.2 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 512 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 1.5 TB |
| Storage | |
| Installed storage | 5,00 |
| Disk controller | Dell PERC H730 SAS Controller |
| Drive interface | SATA |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 36 × 24 × 10 in |
| More details | |
| Management controller | iDRAC8 - Enterprise License |
Questions about this item
How much power do the dual 495 W supplies draw when the R630 runs 24/7?
Each supply is rated at 495 W; the system ships with two for redundancy so continuous draw depends on workload but will not exceed the combined capacity.
Which drive trays and cables must I supply to populate the 10 SFF bays?
The 10 × 2.5″ bays accept SAS or SATA drives; trays and backplane cables are chassis-specific and not included, so you must source Dell R630 2.5″ caddies.
Will the PERC H730 controller recognise older 6 Gb/s SAS drives I already own?
Yes, the H730 supports 12 Gb/s SAS and is backward-compatible with 6 Gb/s and 3 Gb/s SAS or SATA drives.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R740 8x3.5" 1x Xeon Gold 6134 256GB DDR4 No Drive
- Xeon
- 3.2 GHz
DELL PowerEdge M640 Blade 2x Xeon Silver 4215 256GB DDR4 2x 900GB SAS
- Xeon
- 2.5 GHz





