DELL PowerEdge R730xd 24SFF 2x Xeon E5-2660v3 384GB DDR4
24-bay 2.5" rack server with dual 2.6 GHz 10-core Xeon CPUs, 384 GB DDR4 ECC memory and PERC H730 SAS RAID controller
- ProcessorIntel Xeon
- Installed RAM384 GB
- Type of memoryDDR4
- Processor speed2.6 GHz
- Installed CPUs2
- Max supported CPUs2
- Dual Xeon E5-2660v3 CPUs provide 10 cores each at 2.6GHz
- 384GB DDR4 ECC registered memory installed with room to 768GB
- 24 SFF drive bays support 2.5-inch SAS storage
- PERC H730 RAID controller manages arrays
- iDRAC8 Enterprise enables remote server management
Dense 2.5-inch storage server
The Dell PowerEdge R730xd fits twenty-four 2.5-inch drive bays in a 2U rack frame, giving storage-heavy workloads a compact home. Dual Xeon E5-2660v3 processors supply twenty total cores at 2.6GHz, while 384GB of DDR4 ECC registered memory provides a large buffer for database or virtualisation tasks. The PERC H730 SAS controller manages RAID across the backplane, and iDRAC8 Enterprise enables full out-of-band control. This configuration ships without drives so you can populate the bays to match capacity and performance targets.
Steady throughput under load
The 1100W redundant power supplies and chassis airflow are built for continuous operation rather than short bursts, keeping both CPUs and a full complement of drives at stable temperatures. With a maximum memory ceiling of 768GB the platform can absorb growing datasets without a hardware swap, and the dual 10GbE plus dual 1GbE network ports sustain high I/O streams to storage arrays. Integrated graphics handles console output without consuming a PCIe slot that might otherwise serve additional controllers or accelerators.
Rack installation and common pitfalls
Sliding rail kits mount the 36 x 24 x 10 inch, 40-unit chassis in standard four-post racks, but the rails are not included by default and must be requested separately. Drive caddies for the 2.5-inch bays are also absent, so budget for twenty-four caddies plus the drives themselves. The PERC H730 firmware should be aligned with the drive firmware before array creation to avoid compatibility errors, and iDRAC network settings need a static IP plan before first boot to prevent management conflicts.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $1,440.99
- Cheaper than about 60% of the 17,640 comparable items (median $1,910.99).
- Installed RAM 384 GB
- Higher than about 75% of the 15,103 comparable items (median 128 GB).
- Processor speed 2.6 GHz
- Higher than about 80% of the 9,950 comparable items (median 2.3 GHz).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | Rack Mount |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor speed | 2.6 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 384 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 768 GB |
| Storage | |
| Installed storage | 14,40 |
| Disk controller | Dell PERC H730 SAS Controller |
| Drive interface | SAS |
| Graphics | |
| Graphics chip | Integrated Graphics |
| Size & build | |
| Product dimensions | 36 × 24 × 10 in |
| More details | |
| Management controller | iDRAC8 - Enterprise License |
Questions about this item
How loud and hot does the server get when both 2.6GHz Xeon processors run at full load all day?
The chassis holds two 1100W power supplies and uses integrated graphics, so sustained full-load operation will draw significant power and generate considerable heat; adequate rack airflow is essential.
What drives, rails and cabling must I already have to populate the 24 front 2.5-inch bays?
The bays accept SAS drives; the PERC H730 controller manages them, but drives, mounting hardware and any required cables are not included and must be sourced separately.
Will my existing SAS drives work with the PERC H730 controller in this R730xd?
Yes, the PERC H730 SAS controller supports standard SAS drives, so drives you already own that use the SAS interface can be installed in the 24-bay chassis.
More in Rack & Tower Servers
Similar items
DELL PowerEdge T430 5U rack server 2x Xeon E5-2620 v4 2.1GHz 64GB DDR4 8x 4TB SAS H730
- 5U
DELL PowerEdge R730xd 24SFF 2x Xeon E5-2698 v4 384GB DDR4 No Drive
- Xeon
- 2.2 GHz
DELL PowerEdge R740xd 24SFF 2x Xeon Silver 4110 2.1GHz 256GB DDR4 No Drive rack server
- Xeon
- 2.1 GHz





