DELL PowerEdge R740xd2 26 Bay 3.5" 2U Rack Server 2x Xeon Platinum 8160 2.1GHz 24 Core 64GB DDR4 H730P
2U rack server with 26 drive bays, dual 24-core Xeon Platinum 8160 CPUs, 64GB DDR4 and H730P RAID controller
- ProcessorIntel Xeon
- Installed RAM64 GB
- Installed SSDNo
- Processor core count24 Core-Processors
- Operating systemNo
- Type of memoryDDR4
- Dual Xeon Platinum 8160 CPUs deliver 24 cores each at 2.1 GHz base clock
- 26 front-accessible 3.5″ drive bays provide high-capacity storage density in 2U
- PERC H730P controller supports RAID 0/1/5/6/10/50/60 with 2 GB cache
- iDRAC 9 Enterprise enables full remote management and monitoring
- Redundant 1100 W platinum power supplies maintain uptime during failures
Dense 2U storage server
The Dell EMC PowerEdge R740xd2 is a 2U rackmount server built for data-intensive workloads that demand high storage density. It ships with two Intel Xeon Platinum 8160 processors, each running at 2.1 GHz with a 3.7 GHz turbo frequency and 24 cores. The system includes 64 GB of DDR4-2666 ECC registered memory across four modules and a PERC H730P storage controller with 2 GB cache. Twenty-six 3.5-inch drive trays provide extensive capacity for SAS and SATA drives.
Suited for backup and software-defined storage
This platform suits organisations deploying software-defined storage, large backup repositories, or media archives that benefit from dense 3.5-inch drive bays in a 2U form factor. The dual 1100 W platinum power supplies and iDRAC 9 Enterprise support continuous operation and remote management. Buyers who need a smaller rack footprint or fewer drive bays should consider other platforms. The 16 memory slots allow expansion up to 1 TB of DDR4.
26-bay 3.5-inch drive capacity
The defining specification is the 26 front-accessible 3.5-inch trays, which set the maximum number of spinning disks or SATA SSDs the chassis can hold. The PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Network connectivity includes a dual-port 1 GbE LOM and a Broadcom 57414 dual-port 10/25 GbE SFP28 OCP 2.0 mezzanine card. Front bezel and ready rails are not included.
How it compares
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
- Price $2,126.99
- Typical for this category: the median of 17,640 items is $1,910.99.
- Installed RAM 64 GB
- Lower than about 70% of the 15,103 comparable items (median 128 GB).
- Processor core count 24 Core-Processors
- Higher than about 90% of the 7,955 comparable items (median 16).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge |
| Model name | R740xd2 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 24 Core-Processors |
| Processor socket | LGA 3647 |
| Processor speed | 2.1 GHz (3.7 GHz Turbo) |
| Processor details | Platinum 8160 |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 64 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 1 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | No |
| Installed storage | None |
| Disk controller | Dell Perc H730P 2 GB Controller |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Connectivity | |
| Network controller | 1x Integrated Dual Port 1GbE LOM and 1x Dell EMC Broadcom 57414 Dual Port 10/25Gb SFP28 OCP 2.0 Mezzanine Card |
| Ports & slots | |
| Network ports | 4 x Ports |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 2U |
| Software | |
| Operating system | No |
| More details | |
| Management controller | iDRAC9 Enterprise |
Questions about this item
What throughput does the 12Gb/s SAS controller cap at for the 26 drive bays?
The PERC H730P 2GB controller runs at 12Gb/s SAS and SATA across all 26 bays, so each drive is limited by that 12Gb/s link and the RAID mode you choose.
What rack depth and rail kit do I need to mount this 2U chassis?
The server is a 2U rack unit and ships without ready rails, so you must supply compatible sliding rails and a cabinet deep enough for a standard 2U Dell PowerEdge depth.
How do I install the CPUs and memory without bending the LGA 3647 pins?
Open the socket lever, align the two notches on each Xeon Platinum 8160 with the socket keys, lower the processor gently and close the lever; then populate the 16 DDR4 slots in the recommended sequence using 2666 ECC registered modules.
More in Rack & Tower Servers
Similar items
DELL PowerEdge R540 2U rack server 2x Xeon Silver 4114 2.2GHz 10-core 256GB DDR4 8x 4TB SAS
- 2U
- Rack
DELL PowerEdge R740 8x3.5" 2x Xeon Gold 6152 256GB DDR4 No Drive
- Xeon
- 2.1 GHz
DELL PowerEdge T440 5U rack server 2x Xeon Gold 5218 2.3GHz 16-core 64GB DDR4 4x 1.92TB SATA HBA330
- 5U
- Rack





