DELL Venue 10 Pro 5055 5050 Tablet 10.1" LCD Ribbon Cable 1FCDN
Genuine Dell OEM 10.1 inch LCD ribbon cable for Venue 10 Pro 5055 and Venue 10 5050 tablets
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit
- 1 inch LCD ribbon cable restores display connection
- Compatible with Venue 10 Pro 5055 tablet
- Compatible with Venue 10 5050 tablet
- Dell part number 1FCDN matches service manual
Genuine Dell LCD ribbon cable
This genuine Dell OEM part carries part number 1FCDN and fits the Venue 10 Pro 5055 and Venue 10 5050 tablets. It replaces a damaged 10.1 inch LCD video ribbon cable inside the device. Buyers needing a different connector or length cannot use this part.
Compatibility limited to two tablet models
The cable works only with the Venue 10 Pro 5055 and the Venue 10 5050. Any other Dell tablet or laptop requires a different ribbon cable. Verify the exact model number before ordering to avoid a mismatch.
Straightforward internal replacement
Installation requires opening the tablet chassis and disconnecting the old ribbon from the mainboard and display. The fragile flat cable tears easily if bent sharply or pulled at an angle. Take care to seat the connector fully before reassembly.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 93% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
Will the 10.1-inch LCD ribbon cable carry the display signal correctly once fitted inside a Venue 10 Pro 5055 tablet?
Yes, the 1FCDN cable is the genuine Dell OEM replacement for the 10.1-inch LCD video connection in the Venue 10 Pro 5055 and restores the factory display link.
What connector standard does the 1FCDN ribbon use and what does it limit in the Venue 10 5050?
The cable uses the Dell-spec EDP FPC interface that matches the original panel pin-out, limiting the link to the tablet's native 10.1-inch LCD resolution and refresh rate.
What physical space and mounting points does the 1FCDN ribbon need inside the Venue 10 Pro 5055 chassis?
It follows the exact 10.1-inch panel routing with the original bracket holes and ZIF connector orientation, so it fits the existing cable channel without modification.
More in VGA Monitor Cables
Similar items
CableWholesale VGA Y Cable Low Resolution HD15 Male to 2 x HD15 Female 8 inch
- Cable
TeKit VGA Female to RJ45 Female Adapter 2-Pack
- VGA female
- VGA female to RJ45…
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Dell OEM 11.6" LCD Video Ribbon Cable 0T3DW for Inspiron 3168 3169
- Laptop-computer-rep…





