DELL Venue 10 Pro 5056 10.1" LCD Ribbon Cable 3FH80
Genuine Dell OEM 10.1" LCD ribbon cable for Venue 10 Pro 5056 tablets, part 3FH80
- Product typeLaptop-computer-replacement-parts
- Genuine Dell OEM part ensures exact fit
- 1 inch LCD ribbon cable restores display signal
- Dell part number 3FH80 confirms correct replacement
- Compatible with Venue 10 Pro 5056 tablet
- New condition guarantees reliable performance
Genuine Dell OEM LCD Ribbon Cable
This is a genuine Dell OEM replacement ribbon cable for the Venue 10 Pro 5056 tablet. It carries the video signal between the 10.1 inch LCD panel and the system board. The part number is 3FH80 and it matches the alternative reference 450.06805.0001. It is intended for technicians or owners repairing a damaged display connection.
Flexible flat-cable construction
The cable uses a thin flexible printed circuit that routes inside the narrow tablet chassis. Both ends terminate in low-profile connectors that seat directly into the board and panel sockets. No additional adapters or soldering are required during installation. The flat design allows it to follow the factory routing path without strain.
Passive video link with no active electronics
The ribbon contains only copper traces and carries the display signal without amplification or conversion. It draws no power of its own and adds no heat or noise to the system. Reliability depends on correct seating of the connectors and avoiding sharp bends during reassembly. Inspect the original cable for tears or creases before ordering.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 70% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product type | Laptop-computer-replacement-parts |
Questions about this item
Does the 3FH80 ribbon cable carry the LCD video signal for the 10.1-inch display?
Yes, the genuine Dell OEM cable is the LCD video ribbon that connects the 10.1-inch panel to the motherboard on the Venue 10 Pro 5056 tablet.
What physical connector does the 3FH80 cable use to fit the Venue 10 Pro 5056?
The flat flexible cable uses the proprietary Somerset LCM FPC connector keyed for the 10.1-inch LCD panel on the Venue 10 Pro 5056.
How is the 3FH80 ribbon cable installed, and which step is often missed?
Open the tablet chassis, unlock the ZIF latch on the motherboard, insert the 3FH80 cable contacts-down, then relatch — forgetting to flip the latch back down leaves the video link dead.
More in VGA Monitor Cables
Similar items
HANNORD DisplayPort to VGA Cable 6 ft Male to Male Black
- DisplayPort to VGA…
- Black
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Tripp Lite P510-006 6 ft VGA cable HD15 male to female
- no type specified
- Black





