Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120 mm case fan delivers 120.07 CFM at 2900 RPM with PWM speed control and dual ball bearings for 70000-hour life
The Delta AFB1212HHE-PWM is a 120 mm case fan built for systems that need strong static pressure. Dual ball bearings and a 4-pin PWM connector allow automatic speed control tied to workload. It suits builders who want reliable airflow through dense heatsinks or restrictive mesh panels. Buyers needing silent operation above all else may prefer a lower-speed alternative.
At full speed the fan spins at 2900 RPM, moving 120.07 CFM with a maximum air pressure of 9 mmH2O while producing 44 dBA. Typical input power is 4.8 W at 0.4 A, rising to 8.4 W at 0.7 A maximum across the 10.8–13.2 VDC operating range. The airflow-to-noise ratio is 2.73:1, reflecting its focus on pressure over quietness.
The 4-pin PWM connection lets the motherboard reduce speed during light loads, cutting noise when full pressure is not required. Dual ball bearings are rated for 70,000 hours at 40 °C with 15–65 % RH, roughly 16 years at 12 hours daily use. No extra mounting hardware or software utilities are included in the package.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Delta |
| Model name | AFB1212HHE-PWM |
| Product type | Case Fan |
| Performance | |
| Rotational speed | 2,900 RPM |
| Airflow rate | 120.07 CFM |
| Power | |
| Power input connector | 4 Pin PWM |
| Size & build | |
| Bearing design | Dual Ball Bearing |
| Product dimensions | 120 × 120 × 38 mm |
| Shipping weight | 0.31 kg |
| Package size | 316 × 220 × 61 mm |
| Compatibility | |
| Compatible with | Case |
| Environment & compliance | |
| Operating noise | 44 dBA |
Mount the 120 x 120 x 38 mm frame with four screws, then plug the 4-pin PWM connector into the motherboard header; the step often missed is enabling PWM control in BIOS so the fan can vary from idle to 2900 RPM.
The dual ball bearing is rated for 70000 hours at 40 °C and 15 - 65 % RH; after that the bearing will need replacement, and no lubrication or other service is required before then.
At full speed the fan draws 0.7 A (8.4 W) and produces 44 dBA; the noise level and the 9 mmH2O pressure ceiling are the first limits you will encounter under continuous load.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?