DEWANG 3D Printing Pen OLED Pink 1.75mm 0.7mm 170mm 41g
- Stainless Steel
- 1.75 mm
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A slim, lightweight 3D printing pen with an OLED display, six speed levels and instant PLA-to-ABS switching draws 1.75 mm filament through a 0.7 mm ceramic nozzle at 130–230 °C
Color Gold
The DEWANG gold 3D printing pen is a handheld extruder for hobbyists, students and makers who want to draw free-form models in PLA or ABS filament. It suits anyone learning spatial design or creating quick prototypes without a full-size printer. Buyers who need high-volume production or enclosed build chambers will find this tool too limited.
Power the pen from any 5 V 2 A source — power bank, wall adaptor or computer USB port — then load 1.75 mm filament and select PLA or ABS mode on the OLED screen without restarting. The ceramic nozzle heats to 130–230 °C, so the metal cap must be used after each session to avoid burns. A blocked 0.7 mm tip is the most common issue; the detachable design lets you swap it in seconds.
Six speed levels and a 103‑hour motor rating give steady extrusion for detailed artwork, jewellery pieces and small structural parts. The 1.4 cm diameter and 41 g weight keep the hand comfortable during long draws. Very large or thick-walled objects will exhaust the 3‑metre filament samples quickly and demand frequent reloading.
Measured against everything we stock in Desktop 3D Printers, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | 3D Printing Pen |
| Product color | Gold |
| Performance | |
| Maximum working speed | 6 Levels |
| Size & build | |
| Construction material | Stainless Steel |
| Product dimensions | 170 × 14 × 14 mm |
| Product weight | 41g |
| In the box | |
| In the box | 1 × 3D Printing Pen 1 X Power Adapter 1 X USB Cable 3 × 3 m PLA Filaments 1 X Screwdriver 1 X Manual |
| Environment & compliance | |
| Operation temperature | ABS 210?, PLA 190? |
| More details | |
| Filament diameter | 1.75 mm |
| Jets diameter | 0.7 mm |
Other versions of this model
The OLED screen displays the live nozzle temperature; watch it climb toward the 130–230 °C range and confirm the selected PLA 190 °C or ABS 210 °C target is reached before extruding.
The box contains the gold stainless-steel pen, a US-plug power adapter, a USB cable, three 3-metre PLA filaments, a screwdriver and a manual; you only need to buy extra 1.75 mm ABS or PLA filament when the supplied spools run out.
This pen is built for 1.75 mm filament and a fixed 0.7 mm ceramic nozzle, so purchase only 1.75 mm ABS or PLA spools; no other diameter or nozzle option is compatible.
More in Desktop 3D Printers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?