BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Semi-flexible TPU filament in 2.85 mm diameter, 500 g spool, prints at 220-240 °C with high abrasion resistance and vibrant orange colour
E3D Online FleXD TPU Filament in Sweet Orange17 is a semi-flexible material designed for parts that need elasticity and high abrasion resistance. The 2.85 mm diameter spool weighs 500 g and prints with rich, solid colour vibrancy thanks to its naturally transparent base. It suits makers producing phone covers, keyboard protectors, insoles or flexible prototypes.
Switching to FleXD is worth it when your current PLA, PETG or standard TPU cracks under repeated bending or wears too quickly in high-friction areas. The material delivers high shear strength and maintains layer adhesion at 30 % speed around 15 mm/s, so functional prints survive impacts that would shatter harder plastics. It also works with spoolWorks Scaffold support that dissolves in tap water.
Verify your extruder handles 2.85 mm filament and can reach a nozzle temperature between 220 and 240 °C. The heated bed must support 45 to 85 °C and you should have glue stick ready for bed adhesion. Because every printer behaves differently, be prepared to fine-tune settings for reliable results.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | E3D |
| Model name | FleXD |
| Product color | Orange |
| Product type | Filament |
This spool is 2.85 mm diameter; verify your printer accepts that size before loading.
Start with a nozzle temperature between 220 and 240 °C and a bed temperature between 45 and 85 °C.
Keep the spool sealed with desiccant; TPU absorbs moisture and wet filament causes poor layer adhesion.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?