BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Semi-flexible TPU filament on a 500 g spool, 2.85 mm diameter, prints at 220–240 °C with high abrasion resistance and vibrant green colour
E3D spoolWorks FleXD is a semi-flexible TPU filament supplied as a 500 g spool of 2.85 mm green material. It prints at 220-240 °C with a bed temperature of 45-85 °C and a recommended speed of 15 mm/s. The formulation delivers high shear strength and abrasion resistance while remaining elastic with a rich, solid colour.
This filament replaces standard PLA or ABS when parts need to bend, absorb impact or survive repeated flexing. The jump is worth it for functional items such as phone cases, keyboard protectors, insoles or any design that benefits from rubber-like behaviour. It is not for buyers who need a rigid structural material or a dissolvable support filament.
Verify that your extruder and hot-end can handle flexible TPU at the stated temperatures and the slow 15 mm/s feed rate. A glue stick on the build plate is recommended for bed adhesion. Ensure the filament path is well constrained to prevent buckling during the print.
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | E3D |
| Model name | FleXD |
| Product color | Green |
| Product type | Filament |
The spool holds 500 g of 2.85 mm filament, so confirm your extruder and Bowden path accept that diameter before loading.
Print at 15 mm/s (30 % of normal speed) with the nozzle at 220-240 °C and the bed at 45-85 °C; skipping the low speed causes jams and under-extrusion.
Keep the filament sealed with desiccant when not printing; TPU absorbs moisture quickly and will bubble or lose layer adhesion if left exposed.
More in 3D Printing Accessories & Materials
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?