Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
130 mm axial fan for 230 VAC mains, 46/47 W, 2700/3050 RPM, ball bearing, IP20, -25 to 70 °C
The Ebm-Papst W2S130-BM03-01 is a 130mm axial fan built for 230VAC mains operation. It uses a shaded-pole motor with ball bearings and a five-blade steel impeller inside a die-cast aluminium housing. The unit weighs 1.1kg and carries an IP20 rating with Class B insulation. It suits industrial enclosures or specialist PC builds that can wire directly to mains voltage.
At 50Hz the fan draws 46W and 0.27A while spinning at 2700 RPM; at 60Hz it draws 47W and 0.31A at 3050 RPM. This gives strong airflow for dense component stacks or high-heat loads, but the fixed mains voltage and 47W peak demand rule out standard motherboard headers or low-voltage fan controllers. Operation is guaranteed from -25°C to 70°C ambient.
The fan terminates in bare leads for direct 230VAC connection, so the build must provide a fused mains circuit, suitable cable glands and finger guards to meet IP20 safety. The ball bearing motor and all-metal construction resist vibration and high ambient temperatures, freeing the installer from frequent bearing replacements common in sleeve-bearing alternatives. No PWM or speed-control interface is present.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Ebmpapst |
| Model name | W2S130-BM03-01 |
| Product type | AXIAL COOLING FAN |
The fan measures 130 mm square with a die-cast aluminum housing and runs on 230 VAC 50/60 Hz, matching standard industrial cut-outs and mains voltage.
Measure the blade speed with a tachometer; at 50 Hz it should read 2700 RPM and at 60 Hz 3050 RPM while drawing 0.27 A or 0.31 A respectively.
The box contains only the fan unit (Fan*1); screws, guards and a mains cable are not supplied and must be purchased separately.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?