Edifier MR3 2.0 Powered Studio Monitors 42W Black Pair
Powered studio monitors with Hi-Res Audio certification, 42 W total output, Bluetooth 2.0 and balanced TRS, RCA, AUX inputs plus headphone output
- Channel configuration2.0
- Total wattage42 W
- RMS power per satellite42 W
- Driver unitDynamic driver
- Frequency range40 kHz
- Signal-to-noise ratio85 decibels
- Hi-Res Audio certified for accurate 52Hz–40kHz monitoring
- 42 W total power with 3.5″ drivers and 1″ tweeters
- Balanced TRS, RCA, AUX inputs plus front headphone output
- Switchable Music, Monitor and Custom EQ modes via app
- MDF cabinet reduces distortion for studio and daily use
Edifier MR3 42W Studio Pair
The Edifier MR3 is a 2.0 powered monitor pair built for desktop audio production, video editing and critical listening. Each speaker delivers 18W RMS from a Class-D amplifier operating at 24-bit/96kHz for bit-perfect conversion. Hi-Res Audio certification confirms a flat response suited to mixing and mastering tasks.
18W RMS per Channel Headroom
The dual 3.5-inch mid-low drivers and 1-inch tweeters produce a peak SPL of 92.5dB with 85dB signal-to-noise ratio. Frequency response spans 52Hz to 40kHz, covering deep lows and extended highs for detailed monitoring. Bass-heavy material at very high volumes will reach the limits of the 3.5-inch woofers before the amplifier clips.
Balanced TRS RCA AUX Bluetooth 2.0
Balanced TRS, unbalanced RCA and 3.5mm AUX inputs accept simultaneous sources, while a front-panel headphone output enables private monitoring. Bluetooth 2.0 supports multi-point pairing for wireless playback. The EDIFIER ConneX app provides Music, Monitor and Custom EQ modes for room compensation.
How it compares
Measured against everything we stock in Desktop Speakers & Soundbars, at today’s prices. Recalculated every night.
- Price $124.99
- Pricier than about 90% of the 830 comparable items (median $40.99).
Specifications
| Product | |
|---|---|
| Brand name | Edifier |
| Model name | Edifier-mr3-black-fba |
| Part number | Edifier-mr4-mr3 |
| Product type | Monitor |
| Product color | Black |
| Audio & video | |
| Channel configuration | 2.0 |
| RMS power per satellite | 42 W |
| Driver unit | Dynamic driver |
| Frequency range | 40 kHz |
| Signal-to-noise ratio | 85 decibels |
| Power | |
| Total wattage | 42 W |
| Size & build | |
| Measurements | 12.55 in × 18.5 in × 22.0 in |
| Product weight | 5.06 kg |
| In the box | |
| In the box | Warranty Card |
| More details | |
| Control method | Application |
Questions about this item
Can I connect the Edifier MR3 monitors to an older audio interface that only has unbalanced RCA outputs?
Yes, the speakers include RCA inputs alongside balanced TRS and 3.5 mm AUX, so a standard RCA cable from your interface will work without adapters.
How can I verify the MR3 monitors are reproducing the full 52 Hz to 40 kHz Hi-Res range after setup?
Play a 24-bit/96 kHz test sweep through the ConneX app in Monitor mode; the flat response certification means you should hear consistent output across the entire stated bandwidth.
What cables come in the box with the MR3 pair and which ones must I buy separately?
Only a warranty card is listed in the package contents; you will need to supply RCA, TRS, 3.5 mm AUX or speaker cables depending on which inputs you use.
More in Desktop Speakers & Soundbars
Similar items
Logitech Z623 980-000402 2.1 speaker system 200W THX
- Wired
- Black
Creative Labs 51MF8415AA000 Katana SE Soundbar 180W Bluetooth 5.0
- 2 × 109 mm (4.3 in)…
- 55 Hz - 20 kHz





