ELEGOO CA-EL-3DF-PPB0459 PLA+ Filament 1.75mm White 2.24kg
Two 1 kg spools of 1.75 mm PLA+ filament with ±0.02 mm accuracy for reliable FDM printing
- Diameter1.75
- Product color2pcs White
- Main materialPolylactic Acid
- Product weight2.24 kg
- High toughness PLA+ resists impact better than standard PLA
- Diameter held to ±0.02 mm for smooth, consistent feeding
- Mechanical winding and manual checks prevent tangles and line breaks
- Low warp, strong layer adhesion and 200–230 °C print range simplify setup
- Vacuum-sealed after drying eliminates moisture-related clogging and bubbles
Enhanced toughness PLA+ filament
ELEGOO PLA+ filament delivers improved impact strength and toughness compared with standard PLA, making it suitable for functional parts and durable models. The material is polylactic acid in a 1.75 mm diameter with a dimensional accuracy of +/- 0.02 mm for consistent feeding. Two spools provide a total weight of 2.24 kilograms in white colour.
Low warp printing at moderate temperatures
The filament prints at a recommended nozzle temperature of 200 to 230 °C, which reduces warping and shrinkage during normal use. Strong layer adhesion and a glossy surface finish contribute to reliable results without requiring an enclosed printer. The spools are fully dried and vacuum sealed to prevent moisture-related clogging or bubbling.
Neatly wound spools reduce tangles
Each 1 kg spool is mechanically wound and manually inspected to minimise tangles, snaps and line breakage during printing. Universal compatibility covers most common 1.75 mm FDM printers including Neptune, Ender and Kobra series. The packaging protects the filament until it is loaded, supporting a smoother workflow for beginners and experienced users alike.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $28.99
- Typical for this category: the median of 305 items is $27.99.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ELEGOO |
| Model name | CA-EL-3DF-PPB0459 |
| Product color | 2pcs White |
| Size & build | |
| Main material | Polylactic Acid |
| Diameter | 1.75 |
| Product weight | 2.24 kg |
Questions about this item
How do I load the 1.75 mm spools into my FDM printer and what step is often missed?
Mount each 1 kg spool on the holder, feed the filament through the guide tube, and preheat the nozzle to 200‑230 °C before inserting; the step often missed is allowing the nozzle to reach the full temperature range so the first layer adheres without clogging.
What maintenance will the filament need after opening the vacuum seal?
Store the spools in a dry box or resealable bag with desiccant; if the material absorbs moisture, dry it at a low temperature before printing again to prevent bubbles and clogging.
What limit appears first during a long print at the upper end of the temperature range?
Printing near 230 °C can increase stringing and oozing on extended runs, so the practical limit is the nozzle temperature ceiling before surface quality degrades.
More in 3D Printer Filament
Similar items
SUNLU PLA+ Filament 1.75 mm White 1 kg AWJP-PLA+-WT-1KG
- 1000g Pla Plus White
- Polylactic Acid
SUNLU PLA+ 2.0 Filament Black 1.75mm 1000g
- 1000g Black
- PLA+2.0 Filament
SUNLU Silk PLA Filament 1.75mm Light Gold 1KG
- 1000g Light Gold
- Silk Single Color





