ELEGOO PLA Filament 1.75mm Purple 1kg MX-EL-3DF-PB0442
Purple PLA filament on a 1 kg spool with ±0.02 mm diameter accuracy for reliable FDM printing
- Diameter1.75
- Product colorPurple
- Main materialPolylactic Acid
- Product weight1.12 kg
- Consistent feeding from precise 1.75 mm diameter with ±0.02 mm accuracy
- Tangle-free printing thanks to neatly wound spool design
- Reliable extrusion with vacuum-sealed, moisture-protected filament
- Easy setup using low 190–230 °C nozzle temperatures
- Broad printer fit for most common 1.75 mm FDM machines
Purple PLA Filament 1.75 mm
This 1 kg spool of purple polylactic acid filament is made for fused deposition modelling printers that accept 1.75 mm material. The dimensional accuracy is held to +/- 0.02 mm and the spool is vacuum sealed after drying to prevent moisture uptake. It is wound neatly to avoid tangles and feeds consistently on most common FDM machines including Neptune and Ender series. Beginners and experienced makers alike can start printing with minimal setup.
Upgrade from inconsistent or damp filament
Spools that vary in diameter or have absorbed moisture cause clogging, bubbling and layer adhesion problems. This filament replaces those unreliable rolls with a product manufactured to +/- 0.02 mm tolerance and sealed dry, so the jump is worth it when failed prints waste time and material. The lower melting temperature of 190 to 230 °C reduces warp and shrinkage compared with higher temperature materials. Users printing at speeds up to 270 mm/s gain reliable extrusion without retuning the hot end.
One kilogram covers many small to medium parts
A 1.12 kg gross weight spool yields roughly 1 kg of usable filament, enough for dozens of typical models printed at standard infill. Large single prints or extended production runs will exhaust the spool, requiring a changeover mid job. The recommended nozzle temperature range of 190 to 230 °C and printing speeds below 270 mm/s define the practical operating window; pushing beyond these limits risks under extrusion or poor layer bonding.
How it compares
Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.
- Price $28.99
- Typical for this category: the median of 305 items is $27.99.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ELEGOO |
| Model name | MX-EL-3DF-PB0442 |
| Product color | Purple |
| Size & build | |
| Main material | Polylactic Acid |
| Diameter | 1.75 |
| Product weight | 1.12 kg |
Questions about this item
Does the 1.75 mm diameter with ±0.02 mm tolerance fit my printer's extruder?
Yes, the 1.75 mm filament with ±0.02 mm accuracy works with most common FDM printers that accept 1.75 mm spools.
What nozzle temperature should I set for the first print?
Start at 190–230 °C; many users begin near 200 °C and adjust in 5 °C steps until layers bond cleanly.
How should I store the spool after opening to avoid moisture issues?
Keep it in a sealed bag with desiccant; the filament is vacuum-dried at the factory but absorbs humidity once opened.
More in 3D Printer Filament
Similar items
SUNLU PLA+ Filament 1.75 mm White 1 kg AWJP-PLA+-WT-1KG
- 1000g Pla Plus White
- Polylactic Acid
SUNLU PLA+ 2.0 Filament Black 1.75mm 1000g
- 1000g Black
- PLA+2.0 Filament
SUNLU Silk PLA Filament 1.75mm Light Gold 1KG
- 1000g Light Gold
- Silk Single Color





