EN-Labs 3PINSPL26 TX3 3-pin fan splitter cable 10 in 24AWG
Splits one 3-pin fan header into two 3-pin fan connections with 10-inch sleeved cables and 24AWG copper conductors
- Cable length10 in (25.4 cm)
- First connectorTX3 3Pin Female
- Second connectorTX3 3Pin Male
- Connector count3
- Connector genderFemale to Male
- Product typeCable Splitters
- Connect two 3-pin fans to one header
- 10 inch length reaches fans without strain
- 24AWG copper conductor delivers reliable power
- Black braided sleeve protects wires and looks clean
- One header carries full speed signal, other runs two wires
Splitter for two 3-pin fans
This TX3 3-pin splitter connects two case fans to a single motherboard or power-supply header. It is built for builders who need an extra fan connection without adding a fan controller. The cable carries 12 V or 5 V power to both fans from one source. It suits systems with limited 3-pin headers.
24 AWG copper with braided sleeve
The 10 inch cable uses 24 AWG copper conductors wrapped in a black net-jacket sleeve. One female TX3 connector plugs into the header; two male TX3 connectors attach to the fans. Only one male header carries all three pins for speed feedback, the other carries two pins for power only. The sleeve protects the wires during routing.
One header reports speed, the other does not
Because the second male header lacks the tachometer wire, only the first fan reports its speed to the motherboard. PWM 4-pin fans are not supported on either connector. Builders who need independent speed control for both fans cannot use this splitter. The 10 inch length suits typical case layouts but may fall short in large enclosures.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | 3PINSPL26 |
| Product type | Cable Splitters |
| Product color | Black |
| Ports & slots | |
| First connector | TX3 3Pin Female |
| Second connector | TX3 3Pin Male |
| Connector count | 3 |
| Connector gender | Female to Male |
| Size & build | |
| Overall length | 6 in - 10 in |
| Cable length | 10 in (25.4 cm) |
Questions about this item
Does the 3-pin TX3 splitter work with 12 V and 5 V fans?
Yes, the cable supports both 12 V and 5 V fans through the TX3 connectors.
What clearance is needed for the 10-inch sleeved cable and dual male headers?
The 10-inch length with black net jacket sleeving fits standard case fan spacing; both male headers are TX3 3-pin.
How do I install the splitter so the speed signal works correctly?
Plug the female TX3 end into the motherboard or PSU header, then connect the 3-wire male header to the fan that must report RPM.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





