EN-Labs 4PINHUB5P 5-port PWM fan hub 45cm
Expands one motherboard PWM header to five fans with a 45 cm sleeved cable and Molex power
- Cable length1.47 ft (0.45 m)
- Connector count7
- Product typeFan power splitter cable
- Product colorBlack
- Overall length45 cm
- DetailsConnector A: 1x TX4 female. Connector B: 5x TX4 male. Connec
- Expand one PWM header to five fans
- Powered directly by PSU Molex 12 V supply
- Reduces motherboard load when running multiple fans
- Includes 45 cm sleeved black power cable
- Self-stick pad for easy case mounting
Five-port PWM fan hub for multi-fan builds
The EN-Labs 4PINHUB5P expands a single motherboard PWM header to drive up to five fans. It draws 12 V power directly from a PSU Molex connector, reducing load on the mainboard. The 45 cm sleeved black cable and 58 by 18 mm hub board fit inside most cases. Builders who need independent speed curves for each fan cannot use this hub.
Thermals noise and power delivery in daily use
All attached PWM fans follow one shared signal, so they spin at identical speeds. Only the first port labelled CPU Fan passes an RPM reading back to the motherboard. Three-pin fans connected to the hub run at full voltage continuously. Power comes from the PSU, not the header, so total fan current is not limited by the board.
Build quality connectors and mounting practicalities
The hub uses one TX4 female input and five TX4 male outputs on a 45 cm pigtail. A self-adhesive pad secures the 58 by 18 mm PCB to the chassis. Molex power input requires a free PSU connector. The fixed cable length may limit placement in larger enclosures.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Labs |
| Model name | 4PINHUB5P |
| Product type | Fan power splitter cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 7 |
| Size & build | |
| Overall length | 45 cm |
| Cable length | 1.47 ft (0.45 m) |
Questions about this item
How do I install the 58x18 mm hub board and which header must receive the first fan?
Stick the hub to the case using the supplied self-adhesive tape, then plug the first fan into the port marked CPU Fan so the motherboard can read its RPM signal.
What upkeep will the PWM hub and its Molex power lead need over time?
No scheduled maintenance is required; simply check that the Molex connector and the five TX4 fan plugs stay firmly seated and free of dust during routine case cleaning.
What practical limit appears first when all five fans run continuously at 12 V?
The single motherboard PWM header drives every connected fan at the same speed, so the first limit is the shared RPM signal — only the fan on the CPU Fan port reports its speed back to the board.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





