Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 50 cm cable converts a motherboard 20-pin header into two USB 3.0 Type-A ports and includes a PCI rear bracket for chassis mounting
This EN-Labs cable converts a single motherboard 20-pin USB 3.0 header into two external Type-A ports. It suits system integrators and enthusiasts adding front-panel or rear-I/O connectivity to custom chassis. The 50 cm length fits standard ATX and micro-ATX layouts without excess slack. No driver installation is required on modern operating systems.
The adapter draws power directly from the motherboard header, adding negligible load to the 5 V rail. With no active components or fan, it produces zero audible noise and no measurable heat during sustained 5 Gbps transfers. The 18-inch blue cable uses standard gauge wiring rated for the USB 3.0 specification. Thermals remain identical to a native port.
A metal rear bracket is included so the two Type-A connectors can be mounted in a standard expansion-slot cutout. This provides strain relief and a clean, fixed position for frequent device swaps. The bracket uses standard screw spacing compatible with typical case rear panels. No additional screws or software utilities are supplied.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | USB 3.0 |
| Product color | Blue |
| Performance | |
| Rated speed | 5 Gbit/s |
| Ports & slots | |
| Connector count | 3 |
| Size & build | |
| Cable length | 1.64 ft (0.5m) |
| Overall length | 18 in (45.7 cm) |
Connect the 20-pin IDC header to the motherboard USB 3.0 connector, then secure the metal bracket to a rear expansion slot using a case screw. The 18 inch cable reaches most ATX boards.
No scheduled maintenance is required. If a port becomes loose or damaged, the entire adapter cable must be replaced as the ports are not serviceable.
The 50cm cable length and passive design mean signal integrity at 5Gbps is the first constraint under continuous high-throughput use.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?