EN-Labs 5VRGBEX1FT5PK 5V 3-pin RGB female-to-female extension cable 1 ft 5-pack with gender changer
Five 1-foot 5 V 3-pin RGB extension cables with a gender changer for motherboard AURA headers only
- Cable length1 ft (0.3 m)
- Product typeRGB Cable
- Overall length1 ft (0.3 m)
- Key features5 V 3pin AURA RGB Lighting application only Does NOT work fo
- Extends motherboard 5 V RGB headers by 1 ft
- Female-to-female design links strips directly to 3-pin headers
- Included gender changer converts to male-to-male when needed
- Dedicated 5 V AURA RGB use — not compatible with 12 V systems
- Keep total RGB runs under 3.3 ft to avoid dimming
5V 3-pin RGB extension kit
This five-pack supplies 1-foot female-to-female cables that connect 5V 3-pin AURA-compatible LED strips to a motherboard RGB header. Each cable includes a male-to-male gender changer for flexible routing. The set addresses builds where the stock RGB leads fall short of the desired lighting positions.
Replaces short factory leads
Stock RGB cables often measure only a few inches, limiting strip placement inside larger cases or behind panels. These 1-foot extensions bridge that gap without soldering. The jump is worth it when the motherboard header cannot reach the target zone or when daisy-chaining multiple strips along a single run.
15 W header budget and 3.3 ft daisy-chain limit
A typical 5V motherboard header delivers up to 15 W, so total connected lighting must stay within that envelope. The supplier advises keeping the combined strip length under 3.3 ft to avoid voltage drop. Exceeding either limit causes dimming, signalling that the header is overloaded and devices must be reduced.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Labs |
| Model name | 5VRGBEX1FT5PK |
| Product type | RGB Cable |
| Size & build | |
| Overall length | 1 ft (0.3 m) |
| Cable length | 1 ft (0.3 m) |
Questions about this item
What motherboard header does the 5V 3-pin RGB female-to-female extension cable plug into?
It connects directly to a standard motherboard 3-pin 5V RGB header; the arrow mark on the plug must line up with the 5V pin on the board.
How do I use the included gender changer when installing the 1 ft extension cables?
The 3-pin male-to-male adapter joins two female ends together; align the arrow on each connector with the 5V pin before pressing them in.
What length limit should I observe so the RGB lighting does not dim on the 5V 3-pin extension cables?
Keep the total connected RGB strip run under 3.3 ft; if the lights dim, the motherboard 5V/3A header is overloaded and you must reduce the attached devices.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





