Tripp Lite U022-015 USB 2.0 A to B cable 15 ft
- USB A to USB B
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a USB 2.0 9-pin device to a USB 3.0 20-pin motherboard header at 480 Mbps
This adapter cable bridges a USB 2.0 9-pin male connector to a USB 3.0 20-pin female header on the motherboard. It allows front-panel drive bays, floppy-style panels or similar 9-pin devices to plug into newer 20-pin headers. The four-inch length keeps routing tidy inside compact cases. Builders updating older peripherals on modern boards will find it useful.
Although the motherboard side uses a 20-pin USB 3.0 header, the link operates at 480 Mbps because the device end is a 9-pin USB 2.0 interface. The extra pins on the 20-pin side carry SuperSpeed lanes that this adapter cannot utilise. Any connected peripheral will therefore run at High-Speed USB 2.0 throughput only. Do not expect 5 Gbps performance from this connection.
The adapter only works when the peripheral presents a standard USB 2.0 9-pin male header. Panels or cables with 10-pin, 19-pin or proprietary layouts will not mate with the 9-pin male end. Verify the device connector pin count before purchase; this cable cannot adapt other header types.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | ADUSB9M220F |
| Product type | Adapter |
| Product color | Black |
| Performance | |
| Rated speed | 480 Mbit/s |
| Ports & slots | |
| Connection type | Motherboard USB 20pin to 9pin |
| Connector count | 2 |
| Size & build | |
| Cable length | 4 in (10.2 cm) |
The adapter has a 9-pin USB 2.0 male connector; it fits 9-pin drive panels and floppy panels.
The link runs at USB 2.0 speed, so any USB 3.0 device connected through it is limited to 480 Mbps.
The 20-pin female end plugs into a USB 3.0 header, but only the USB 2.0 pins are wired, capping the connection at 480 Mbps.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?