EN-Labs ATX P4 to EPS 8-Pin Adapter Cable 6.1 in
Converts a 4-pin ATX 12 V connector to an 8-pin EPS 12 V plug using 18 AWG UL 1007 wire in a 6.1 in length
- Cable length6.1 in (15.5 cm)
- Connector count2
- Product typeEPS CPU power cable
- Overall length6 in (15.2 cm)
- Converts a 4-pin P4 connector to an 8-pin EPS for motherboard compatibility
- 1 in cable length fits compact builds with minimal slack
- 18AWG UL1007 tinned copper wire carries 12V DC power reliably
- Female 4-pin ATX 12V to male 8-pin EPS 12V connector pairing
- Two-connector adapter design simplifies PSU-to-motherboard power conversion
ATX P4 to EPS 8-Pin Adapter
This 6.1-inch adapter converts a power supply's 4-pin ATX 12V connector into an 8-pin EPS 12V plug for motherboards that require the larger CPU power input. It uses 18AWG UL1007 tinned copper wire rated for 12V DC operation. The short length keeps cable routing tidy inside compact chassis.
Builders with 4-pin PSU and 8-pin motherboard
The cable suits builders whose PSU only provides a 4-pin P4 connector while the motherboard demands an 8-pin EPS header. It does not help systems that already have a native 8-pin lead or need additional PCIe power connectors. Buyers who want more length for full-tower routing should look at something else.
18AWG UL-listed wire and short reach
The bundled 18AWG UL1007 wire meets safety standards for 12V DC power delivery and reduces voltage drop over the short run. Its 6.1-inch span limits slack, which improves airflow in small-form-factor builds. No extra sleeves, combs or software are included.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | EPS CPU power cable |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 6 in (15.2 cm) |
| Cable length | 6.1 in (15.5 cm) |
Questions about this item
What PSU connector must I already have to use this EN-Labs ATX P4 to EPS 8-pin adapter?
Your power supply must provide a 4-pin ATX 12V P4 female connector; the adapter plugs into that header and converts it to an 8-pin EPS 12V male plug for the motherboard.
Will this 18 AWG UL1007 adapter handle the power draw of an older 4-pin PSU rail on a modern 8-pin motherboard socket?
The cable uses 18 AWG tinned copper wire rated for 12 V DC, matching the original P4 rail specification, so it carries the same current the PSU already delivers.
How can I confirm the EN-Labs adapter is seated correctly after installation?
Both connectors are keyed — push the 4-pin female onto the PSU header until it clicks, then seat the 8-pin male into the motherboard EPS socket until its latch engages; the system will POST normally when power is applied.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





