EN-Labs EPS-2XPCIE8-20CM internal power cable, 8 inches
Converts a CPU EPS 8-pin connector into two PCIe 8-pin (6+2) plugs for graphics cards using 18 AWG copper conductors over 20 cm
- Cable length8 in (20.3 cm)
- Connector count3
- Conductor typeCopper Conductor
- Overall length8 in (20.3 cm)
- Key featuresConnect your power supply to newer 8-pin PCIe graphics cards
- Splits one CPU EPS 8-pin into two PCIe 8-pin connectors
- 18 AWG copper conductors deliver stable power to graphics cards
- 20 cm length keeps cable routing tidy inside the case
- 6+2 pin design fits both 6-pin and 8-pin GPU sockets
- Female CPU end plugs into PSU, male PCIe ends plug into graphics card
Power-supply adapter for dual GPU feeds
This 8-inch EN-Labs cable converts a single CPU EPS 8-pin output on the power supply into two PCIe 8-pin (6+2) connectors for graphics cards. It uses 18AWG copper conductors and is built for new condition installations.
Builders adding a second GPU without a native
The splitter suits systems where the PSU has a spare CPU 8-pin header but lacks enough native PCIe connectors for the graphics cards installed. It is not for motherboard power, and it cannot replace a GPU-to-GPU splitter or a PSU that already provides sufficient PCIe outputs.
EPS 8-pin female to dual PCIe 8-pin (6+2) male
The single specification that decides fit is the connector mapping: one CPU EPS 8-pin female end plugs into the PSU cable, while two 8-pin (6+2) male ends feed the graphics cards. The 20 cm length and 18AWG gauge are fixed.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 92% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | EPS-2XPCIE8-20CM |
| Ports & slots | |
| Connector count | 3 |
| Size & build | |
| Overall length | 8 in (20.3 cm) |
| Cable length | 8 in (20.3 cm) |
| Conductor type | Copper Conductor |
Questions about this item
How do I install this EPS-to-dual-PCIe splitter and what step do people often miss?
Plug the CPU 8-pin female end into the PSU's EPS cable, then connect the two 8-pin (6+2) male ends to the graphics card; the step often missed is verifying the PSU EPS rail can supply both GPU connectors.
What maintenance or replacement will this 18 AWG copper cable need later?
Inspect the connectors and insulation periodically for heat discoloration or loose pins; replace the cable if any conductor damage or melting appears.
What limit shows up first under sustained load on this 8-inch splitter?
The 18 AWG copper conductors and EPS source connector will hit their current-carrying limit before the short 20 cm length becomes a voltage-drop issue.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 5.5×1.7 mm female to 5.5×2.5 mm male DC power adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB Type C Female to Female Adapter internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





