EN-Labs IDEEX14 Molex 4pin Power Extension Cable 14 inch 18AWG
Extends a Molex 4-pin power cable by 14 inches using 18AWG copper conductors
- Cable length14 in (35.6 cm)
- First connectorMolex LP4
- Second connectorMolex LP4
- Connector count2
- Connector genderMale to Female
- Product typeExtension Cable
- Extends Molex power reach by 14 inches for flexible drive placement
- 18AWG copper conductors deliver reliable current to HDDs and optical drives
- Male-to-female LP4 connectors plug directly into existing PSU cables
- Supports 5V and 12V rails for standard IDE device compatibility
- Multi-colour wiring simplifies identification during builds and troubleshooting
Molex 4-pin LP4 extension cable
This 14-inch extension adds reach between a power supply Molex 4-pin LP4 male connector and a Molex 4-pin LP4 female device plug. It uses 18AWG copper conductors rated for 5V and 12V DC delivery. The multi-colour wiring aids quick identification inside a chassis. It suits builders extending power to legacy hard drives, optical drives or fan controllers.
Check connector gender and clearance
Verify that your PSU provides a Molex 4-pin LP4 male lead and that the target device accepts a Molex 4-pin LP4 female socket. Ensure the 14-inch length bridges the gap without strain and that the cable routing clears moving parts. The 18AWG gauge matches standard peripheral power requirements for 5V and 12V lines.
Extra length simplifies routing
The 14-inch extension removes the need to stretch short factory cables across large cases or behind drive cages. Multi-colour insulation makes it easier to trace the 5V and 12V wires during installation or troubleshooting. No additional adapters or software are included; the cable is a passive wiring extension only.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | IDEEX14 |
| Product type | Extension Cable |
| Product color | Multi-Color |
| Ports & slots | |
| First connector | Molex LP4 |
| Second connector | Molex LP4 |
| Connector count | 2 |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 11 in - 15 in |
| Cable length | 14 in (35.6 cm) |
Questions about this item
What connectors come on the cable and do I need any extra adapters?
The cable has a Molex 4-pin LP4 male connector on one end and a Molex 4-pin LP4 female connector on the other, so it plugs directly between your PSU lead and the drive without extra adapters.
There is a length range of 11 to 15 inches in the specs — which length will I actually receive?
The cable supplied is 14 inches long, matching the IDEEX14 model designation.
What does the 18AWG copper rating mean for power delivery to my hard drive?
18AWG copper conductors are sized to carry the 5 V and 12 V DC currents required by standard IDE hard drives, optical drives and other Molex-powered devices over the 14-inch run.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





