EN-Labs IDEEX4-3PIN8 internal power cable 8in 3-pin 4in Molex 12V 18AWG 22AWG
Adapts a Molex LP4 connector to an 8-inch 3-pin fan lead and adds a 4-inch Molex extension, both 12 V only
- Connector count3
- Connector genderMale to Male
- Product typeCable Splitters
- Product colorMulti-Color
- Overall length6 in - 10 in
- DetailsMolex 4pin LP4 Extesnion Cable Wire Gauge:18AWG Copper Cable
- Powers 3-pin CPU or case fans from a Molex 4-pin supply
- 8-inch 22AWG copper lead reaches fan headers cleanly
- 4-inch 18AWG Molex extension preserves a PSU port for other devices
- 12 V DC only — prevents damage to 5 V fans
- Works with both 3-pin and 4-pin fan connectors
Molex to 3-pin fan adapter with port saver
This cable extracts a 3-pin TX3 fan power feed from a standard 4-pin Molex LP4 connector on the power supply. An additional 4-inch Molex male-to-female extension preserves the original port for another device. The assembly suits builders who need to run a 3-pin CPU or case fan from a 12 V DC rail without sacrificing a Molex connection.
Replaces a missing or damaged 3-pin fan header
Use this adapter when the motherboard lacks a spare 3-pin header or when an existing header has failed. The jump is worthwhile only if the fan operates on 12 V DC; the cable does not support 5 V DC fans, so owners of low-voltage models must look elsewhere.
Simple plug-in installation with one polarity check
Both Molex and 3-pin connectors are keyed, so they fit in a single orientation. The 3-pin plug carries only two wires and omits the tachometer pin, meaning fan-speed reporting will not function. Verify that the fan is rated for 12 V DC before powering the system.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | IDEEX4-3PIN8 |
| Product type | Cable Splitters |
| Product color | Multi-Color |
| Ports & slots | |
| Connector count | 3 |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 6 in - 10 in |
Questions about this item
Will the 4-inch Molex LP4 male-to-female extension reach my drive without blocking the adjacent PSU connector?
The 4-inch 18AWG Molex LP4 extension adds just enough length to act as a port saver so the fan tap does not occupy the PSU socket.
Which wire do I leave unconnected when plugging the 3-pin fan male onto a 4-pin motherboard header?
The 3-pin male carries only two wires (12 V and ground), so the tachometer pin on the 4-pin header simply stays empty.
How often should I check the 22AWG fan tap wires for fatigue if the cable is routed behind a drive cage?
Inspect the 22AWG fan tap at each major hardware change; the finer gauge is more prone to work-hardening when bent in tight spaces.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





