Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one internal USB 2.0 9-pin header into two ports for fans, controllers and RGB accessories, 30 cm cable with self-stick adhesive
The EN-Labs INU29P1X2 duplicates a single motherboard USB 2.0 9-pin header into two male connectors. It targets builders who need extra internal ports for devices such as fan controllers or RGB lighting hubs. A 30 cm cable and self-adhesive pad allow tidy placement inside the case. The FE1.1S chipset handles the hub function.
The hub operates at USB 2.0 high-speed 480 Mbps and full-speed 12 MHz modes. Each downstream port can deliver up to 5 V 500 mA, matching the standard USB 2.0 power specification. The FE1.1S chipset manages traffic between the two ports without requiring external power. Total bandwidth is shared across both connected devices.
The splitter relies on a single upstream USB 2.0 9-pin header, so aggregate throughput cannot exceed 480 Mbps. Two high-bandwidth peripherals will contend for that shared pipe. The 500 mA per port limit means devices drawing more current need their own power source. Motherboard header pin-out must follow the standard 9-pin layout.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | INU29P1 × 2 |
| Product type | Adapter |
| Product color | Black |
| Ports & slots | |
| Connection type | USB 2.0 9pin 1 to 2 splitter hub |
| Size & build | |
| Cable length | 1 ft (0.3 m) |
The hub is powered from the motherboard header and supplies up to 5V 500mA total across both ports, so heat and power draw stay within normal USB 2.0 limits.
You need one free internal USB 2.0 9-pin header on the motherboard to plug the male connector into.
The adapter only provides USB 2.0 9-pin male outputs, so it cannot connect to a USB 3.0 front-panel header.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?