EN-Labs KITPSUSW6PX108P 10-port PCIe 6-pin breakout board with 10 cables
A 10-port PCIe 6-pin breakout board with 10 included 18AWG cables supports up to 1600W for GPU mining power supplies
- Cable length1.64 ft (0.5m)
- Connector count10
- Product typePower Supply Breakout Board Adapter w/ Cable Kit
- Overall length50CM/ 19.7 in
- DetailsEn-Labs KITPSUSW6PX108P 10 ports PCIe 6-pin GPU Mining Power
- 10-port breakout board powers up to ten GPUs from one supply
- Supports 1600W maximum for high-density mining rigs
- Includes ten 18AWG cables with 6-pin to 6+2-pin connectors
- 50cm cable length fits standard chassis layouts
- Solid-state capacitor filtering stabilises power delivery
10-port PCIe breakout board for server PSUs
This EN-Labs breakout board converts a compatible server power supply into ten PCIe 6-pin outputs for GPU mining rigs. The kit includes ten 18AWG cables that adapt each 6-pin port to a 6+2-pin connector, providing 50 cm of reach per cable. Solid-state capacitors on the board filter the 12 V rail for stable delivery.
Replaces custom wiring or multiple adapter cables
Instead of soldering harnesses or chaining splitters, this single board distributes up to 1600 W across ten ports with factory-crimped cables. The jump is worth it when you are powering six or more graphics cards from a Common Slot supply such as the DPS-1200 or PS-2751 series and want a cleaner, more reliable 12 V distribution.
Verify your PSU model
The board only mates with the specific Common Slot units listed, including DPS-800GB, DPS-1200 variants, PS-2751-5Q and HSTSN-PL12; other server PSUs will not connect. Ensure your chassis has space for the board and 19.7-inch cable runs to each GPU, and that your graphics cards accept 6+2-pin power inputs.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $27.99
- Pricier than about 70% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Labs |
| Product type | Power Supply Breakout Board Adapter w/ Cable Kit |
| Ports & slots | |
| Connector count | 10 |
| Size & build | |
| Overall length | 50CM/ 19.7 in |
| Cable length | 1.64 ft (0.5m) |
Questions about this item
What clearance does the 10-port breakout board need inside the case?
The board itself is compact and the cables are 50 cm long, so you only need room for the board plus 19.7 inches of cable routing per GPU.
How do I connect the board to a server PSU and what step is often missed?
Plug the board into the PSU's common-slot edge connector, then attach the 10 PCIe 6-pin cables; the step people forget is seating each 6-pin fully until it clicks.
When should the included 18 AWG cables be replaced?
Replace any cable if the insulation is cracked, the pins are discoloured, or the cable has been run continuously near its 1600 W total rating for extended periods.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister 5.25 inch to 5x 3.5 inch bracket internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





