EN-Labs LP42TX425CM Molex to 4 Pin PWM 3 Pin Fan Power Adapter Cable 10 Inch Black Sleeved
Converts a Molex power connector to a 3-pin or 4-pin fan header delivering 12 V only with no PWM control
- Cable length10 in (25.4 cm)
- First connectorMolex IDE 4pin
- Second connector4pin fan male (2pin tips)
- Connector count2
- Product typeFan power splitter cable
- Product colorBlack
- Powers 3-pin or 4-pin fans directly from a Molex PSU connector
- Delivers 12 V DC through a two-wire power-only link
- Black sleeved jacket protects wires and keeps builds tidy
- Compact 10 inch length fits tight chassis routing
- Simple plug-and-play adapter requires no motherboard PWM header
Power adapter for Molex-to-fan connections
The EN-Labs LP42TX425CM adapter cable converts a standard four-pin Molex power connector from a PSU into a four-pin fan header. It supplies 12 V DC power to a 3-pin or 4-pin PWM device such as a CPU cooler or case fan. The cable is 10 inches long and wrapped in black sleeving.
Check your fan header and PSU connectors
Verify that your power supply provides a free four-pin Molex output and that the target fan uses a standard three-pin or four-pin header. The adapter carries only two power wires, so the fan will receive constant 12 V without PWM speed control or tachometer feedback to the motherboard.
Thermals noise and power in normal use
The adapter itself draws negligible power and adds no audible noise because it contains no active components. Fan noise and thermal performance depend entirely on the connected cooler running at full 12 V speed. The black sleeving resists abrasion and keeps the 10-inch cable tidy inside the chassis.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 96% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | LP42TX425CM |
| Product type | Fan power splitter cable |
| Product color | Black |
| Ports & slots | |
| First connector | Molex IDE 4pin |
| Second connector | 4pin fan male (2pin tips) |
| Connector count | 2 |
| Size & build | |
| Overall length | 10 in / 25CM |
| Cable length | 10 in (25.4 cm) |
Questions about this item
Does the package include only the adapter or are extra cables needed?
The box contains the single Molex-to-fan adapter cable; no additional cables are required for the connection.
Why does the LP42TX425CM have a four-pin fan plug but only two wires?
The four-pin connector carries only the 12 V power lines, so the fan runs at full speed without PWM control or RPM feedback.
What does the 12 V output mean for a fan connected through this adapter?
The fan receives constant 12 V from the PSU Molex connector, so it spins at maximum speed and cannot be regulated by the motherboard.
More in Internal PSU & Riser Cables
Similar items
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Dimastech BT111 Black & Red Switch Cables 600mm 2-Pin I/O
- 1.97 ft (0.6 m)





