Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Micro USB OTG Y-cable adds a USB-A port and separate 12-inch power lead for 2.5-inch drives
This EN-Labs cable adds a USB-A female port to Micro USB devices that support USB OTG, letting you attach flash drives, keyboards, mice, hubs or Ethernet adapters. A second USB-A male tail supplies extra power for bus-powered 2.5" hard drives or SSDs. The OTG leg measures 8 inches and the power leg 12 inches. Both connectors use USB 2.0 signalling.
Carrying one Y-cable removes the need to pack a standalone OTG adapter plus a dedicated power cable when you work with external storage on the go. The upgrade is worthwhile whenever your tablet or phone cannot deliver enough current for a spinning drive or when you want to keep the device charged while accessories are attached. It does not charge the host phone or tablet itself.
The link tops out at USB 2.0 transfer rates, so large file moves will be slower than on USB 3.0 or later hosts. Only flash media formatted as FAT32 is guaranteed to be recognised; other file systems may not mount. The host must explicitly support USB OTG — devices without that capability cannot use the adapter at all.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | En-Labs |
| Product type | Adapter |
| Ports & slots | |
| Connection type | Micro USB to USB A |
The OTG leg is 8 inches long and the auxiliary power leg is 12 inches, so allow at least that much clearance behind the Micro‑USB port for both connectors to sit without strain.
Insert the Micro‑USB male into the host device first, then attach the drive to the USB‑A female, and finally plug the USB‑A male into a power source; the frequent error is powering the drive before the host recognises the OTG connection.
The USB‑A female is rated for typical insertion cycles; if it becomes loose or the 8‑inch or 12‑inch leads fray, the whole Y‑splitter must be replaced as it is not user‑serviceable.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?