EN-Labs MINIRGBCOSATA5VIR 5V 3pin ARGB Controller SATA
Controls 5V 3-pin ARGB fans and strips via wireless IR remote up to 6.6FT, powered by SATA with no motherboard header or software required
- Product typeRGB Controller
- DetailsWireless IR remote control Power - Ture On/Shut Down Speed -
- Key features5 V 3pin ARGB Controller,Ideal for ARGB case fan,LED light s
- Controls ARGB fans and strips without a motherboard header
- Wireless IR remote adjusts modes up to 6.6 ft away
- Draws power directly from a SATA connector on the PSU
- Three onboard buttons change mode speed and colour manually
- Supports 10 automatic lighting effects and single-colour selection
5V ARGB controller with wireless IR remote
The EN-Labs MINIRGBCOSATA5VIR is a 5V 3-pin ARGB controller powered by a SATA connection from the power supply. It drives addressable RGB fans, LED strips and water-cooling radiators without needing a motherboard ARGB header or any software. A wireless IR remote operates the unit from up to 6.6FT away.
Builders without a 5V ARGB header.
This controller suits systems that lack a native 5V ARGB header but have a spare SATA power plug. It is incompatible with 12V 4-pin RGB devices, so buyers using standard 12V RGB fans or strips must look elsewhere. The three onboard buttons duplicate the remote’s mode, speed and colour controls for quick manual changes.
Sustained operation via direct SATA power
Because the unit draws power directly from the PSU through SATA, lighting performance remains stable during long sessions without loading the motherboard’s ARGB circuitry. The automatic cycle mode rotates through six effects at ten seconds each, while brightness and speed settings stay consistent over extended use.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 65% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Model name | MINIRGBCOSATA5VIR |
| Product type | RGB Controller |
Questions about this item
What type of power connector must my power supply provide for this controller?
The controller draws power from a standard SATA connector on the PSU.
Can I connect 12 V 4-pin RGB fans or strips to this unit?
No, it only supports 5 V 3-pin ARGB devices and is incompatible with 12 V 4-pin RGB hardware.
How do I confirm the controller is operating correctly after installation?
Use the IR remote or the three onboard buttons to cycle through the 10 lighting effects and verify colour, brightness and speed changes respond as expected.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister PS VR2 Controller Charger Station internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





