EN-Labs Molex 4-pin Male to 2 x SATA 15-pin Female 8 inch Y Splitter Cable
Converts a Molex 4-pin plug into two 15-pin SATA power connectors using 20AWG copper over eight inches
- Connector count3
- Connector genderMale to Female
- Product typeCable Splitters
- Product colorMulti-Color
- Overall length6 in - 10 in
- DetailsType :SATA power splitter cable Length:8 in Conductor:20AWG
- Powers two SATA drives from one Molex connector
- 20AWG copper conductor delivers reliable current
- 8 inch length fits compact drive bays
- Supports 12V and 5V SATA devices
- Y-splitter design adds drives without extra PSU cables
Molex to Dual SATA Power Splitter
This eight-inch Y-splitter cable converts a single four-pin Molex connector into two fifteen-pin SATA power connectors. It uses twenty AWG copper conductors and carries both twelve-volt and five-volt rails. The multi-colour wires help identify each rail during installation.
Builders adding SATA drives to older power supplies
Suitable for anyone needing to power two SATA hard drives or solid-state drives from an existing Molex lead. Not suited for builders whose power supply already provides native SATA connectors or who require more than two additional SATA power ports.
Eight-inch cable length
The fixed eight-inch length determines whether the splitter reaches the drive bays in a given chassis. Measure the distance from the Molex source to the furthest drive before ordering.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Cable Splitters |
| Product color | Multi-Color |
| Ports & slots | |
| Connector count | 3 |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 6 in - 10 in |
Questions about this item
How can I confirm the Molex-to-SATA splitter is delivering power correctly after connecting it?
After setup, each attached SATA drive should spin up and appear in the BIOS or operating system without errors.
What connectors are included and is anything else required to use the splitter?
The cable has one 4-pin Molex male connector and two 15-pin SATA female connectors; no extra parts are needed if your power supply has a free Molex plug.
Which length version of this splitter should I choose for a standard drive bay?
The 8 inch length fits typical internal drive-to-PSU routing in most chassis.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





