EN-Labs PCIe 6-pin Male to Male Internal Power Cable 50 cm 18AWG
A 50 cm PCIe 6-pin male-to-male cable with UL-listed 18AWG conductors for GPU mining power-supply breakout boards
- Cable length1.64 ft (0.5m)
- First connectorPCIe 6pin Male
- Second connectorPCIe 6pin Male
- Connector count2
- Product typePCIe 6pin power cable for mining
- Overall length50CM/1.64 ft
- UL Listed 18AWG copper conductor ensures safe power delivery
- 50 cm ribbon cable keeps GPU-to-board runs tidy
- PCIe 6-pin male both ends connects mining breakout boards directly
- Compatible with DPS-1200, DPS-800GB, PS-2751-5Q and similar units
- New condition guarantees factory-fresh reliability for continuous mining loads
PCIe 6-pin male-to-male cable for mining breakout
This EN-Labs cable carries 12 V power between a mining breakout board and a graphics card. Both ends terminate in standard PCIe 6-pin male connectors. The 50 cm length suits compact GPU spacing inside mining frames. UL-listed 18 AWG copper conductors handle the current required by supported server power supplies.
Builders wiring DPS-800GB, DPS-1200.
The pinout matches the listed server PSUs and HSTSN-PL12 breakout boards. Installers using consumer ATX power supplies or 8-pin PCIe ports will need a different cable. The fixed 50 cm reach also rules out builds where cards sit farther from the breakout board.
UL-listed 18 AWG copper conductor rating
This wire gauge sets the safe continuous current for each 6-pin connection. Verify that the GPU power draw stays within the 18 AWG limit before deploying multiple cards on a single rail.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 91% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | En-Labs |
| Product type | PCIe 6pin power cable for mining |
| Ports & slots | |
| First connector | PCIe 6pin Male |
| Second connector | PCIe 6pin Male |
| Connector count | 2 |
| Size & build | |
| Overall length | 50CM/1.64 ft |
| Cable length | 1.64 ft (0.5m) |
Questions about this item
What gauge conductor limits current under sustained mining load?
The cable uses UL-listed 18AWG copper conductors, which set the safe continuous current capacity for the 6-pin PCIe connectors.
How much heat does the 50 cm ribbon cable produce when running all day?
The 18AWG copper ribbon generates minimal heat at rated load; its short 50 cm length keeps resistance low during continuous operation.
Which breakout board or PSU must I already own for the male-to-male plugs to work?
You need a mining breakout board or server PSU such as DPS-800GB, DPS-1200, PS-2751-5Q, HSTSN-PL12, DPS-700LB, PS-2112-5L, DPS-750RB or DL580 that provides a female PCIe 6-pin output.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister USB to 25 Pin DB25 Parallel Printer Cable Adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





