EN-Labs PWMHUB10S50 10 Port PWM Fan Hub SATA 15-pin 1.64ft
Ten-port PWM fan hub splits one motherboard header into ten 4-pin connectors, powered by a SATA 15-pin plug with a 1.64ft RPM feedback cable
- Cable length1.64 ft (0.5m)
- First connectorSATA 15-pin
- Second connector10 x PWM 4pin
- Connector count12
- Product typePWM 4pin fan hub splitter
- Product colorBlack
- Controls up to ten fans from one PWM signal
- Red port returns RPM feedback to the motherboard
- Works with both 3-pin and 4-pin fans
- 64 ft cable reaches across most cases
- SATA 15-pin power connector supplies 12 V to all ports
10-Port PWM Fan Hub
The EN-Labs PWMHUB10S50 expands a single motherboard fan header into ten 4-pin PWM connections. It draws power from a SATA 15-pin connector and includes a 1.64ft RPM feedback cable for monitoring one fan speed.
Red Port Speed Control
The red port passes the motherboard PWM signal to all ten fans so they spin at the same regulated speed. 3-pin fans connected to the hub run at full fixed speed because they lack PWM control.
Twelve Connectors Total
The hub provides ten fan outputs plus the SATA power input and the motherboard signal input. Adhesive backing and a central screw hole allow secure mounting inside the chassis where space permits.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | PWMHUB10S50 |
| Product type | PWM 4pin fan hub splitter |
| Product color | Black |
| Ports & slots | |
| First connector | SATA 15-pin |
| Second connector | 10 x PWM 4pin |
| Connector count | 12 |
| Size & build | |
| Overall length | 1.64 ft / 50CM |
| Cable length | 1.64 ft (0.5m) |
Questions about this item
How do I mount the hub inside my case?
The hub has EVA double-sided adhesive on the back for flat surfaces and a central screw hole on the PCB for mechanical fixing.
Which header do I plug the RPM feedback cable into and what happens if I use the wrong one?
Connect the 1.64ft RPM cable to the red CPU fan header on the motherboard; only that port sends a speed signal back to the board.
Will I need to replace the power cable or the hub itself over time?
The hub draws power from a SATA 15-pin connector; as long as the PSU cable remains intact no replacement is required.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





