EN-Labs RGBHUB1X10 10-Port 12V AURA RGB Lighting Hub
A 12V AURA RGB hub that expands one motherboard header to ten channels for synchronous fan and lighting control, with a 1ft extension cable and self-adhesive mounting
- Product typeRGB hub
- DetailsExtend the rare RGB interface on your motherboard to ten. Al
- Control ten RGB channels from one motherboard header
- Synchronise up to 10 fans and lighting strips together
- 12 V AURA compatibility with major motherboard brands
- 1 ft female-to-female extension cable included in the box
- 3M self-adhesive pad secures the hub inside the case
What the hub does
The EN-Labs RGBHUB1X10 expands a single motherboard 12V AURA header into ten ports. It lets you run up to ten RGB fans or lighting strips in sync from one connector. A 1 ft female-to-female extension cable is included in the box. A self-adhesive pad on the underside secures the hub inside the case.
Who this suits and who should look elsewhere
Builders with a compatible 12V AURA motherboard who want to synchronise multiple RGB devices will find it useful. It is not for systems that lack a 12V AURA header or that use addressable 5V RGB. Buyers who need more than ten channels or an external power input should look elsewhere. The hub draws all power from the motherboard header.
Capacity and headroom
The motherboard header typically supplies at least 12V at 1A, giving 12W total for all connected devices. The hub adds no extra power capacity of its own. Cable runs should stay under 3.3 ft to avoid signal loss. If lights dim, the header is overloaded and you must reduce the number of connected devices.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 92% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Labs |
| Model name | RGBHUB1 × 10 |
| Product type | RGB hub |
Questions about this item
Does my motherboard need a 12V AURA RGB header to use this hub?
Yes, the hub connects to a 12V AURA RGB header on the motherboard and the arrow mark on the plug must line up with the 12V pin on both the board and the hub.
Will the hub power older 12V RGB fans that draw more than 1 A in total?
The motherboard header typically supplies 12 V at 1 A, so if connected devices dim it means the header is overloaded and you should reduce the number of attached fans or strips.
How can I confirm all ten channels are lighting in sync after installation?
Use the motherboard RGB software to run a colour cycle; every connected fan or strip should change colour together without any channel lagging or staying dark.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 5.5×1.7 mm female to 5.5×2.5 mm male DC power adapter
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB Type C Female to Female Adapter internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





