EN-Labs RGBHUB1X7 12V AURA RGB Hub 7 Port 3.3ft
Connects up to seven 12V AURA RGB devices to a single motherboard header and includes a 3.3ft extension cable with adhesive backing for case mounting
- Cable length3.3 ft (1.01 m)
- First connectorRGB 12 V
- Second connectorRGB 12 V
- Connector count8
- Product typeRGB Hub
- Product colorBlack
- Controls seven RGB devices from one motherboard header
- 12V AURA synchronous lighting across all ports
- 3 ft extension cable included for flexible routing
- 3M self-adhesive pad secures hub inside the case
- Black finish blends with standard PC builds
What this hub does and who uses it
The EN-Labs RGBHUB1X7 splits a single motherboard 12V AURA header into seven ports so you can run multiple RGB fans or strips from one connector. It is built for builders who want synchronised 12V lighting without adding a separate controller. The hub draws all its power from the motherboard header and includes a 3.3ft female-to-female extension cable for flexible routing inside the case. A 3M adhesive pad on the underside secures the unit to any flat surface.
Limits of the 12V AURA interface
The motherboard header typically supplies 12V at 1A, which equals 12W of total power for every device attached to the hub. Because the hub itself adds no extra power capacity, every fan or strip shares that same budget. If connected lighting appears dim, the header is overloaded and you must reduce the number of devices. The hub only works with 12V AURA RGB; it does not support 5V addressable RGB headers. Arrow markings on each plug must align with the 12V pin on both the motherboard and the hub.
Capacity and headroom in practice
You can connect up to seven 12V RGB channels and control them synchronously through the motherboard software. The 3.3ft extension cable sets the practical reach for devices mounted farther from the header. Total lighting load must stay within the header’s 12W limit, so high-density strips or many fans will hit that ceiling quickly. For installations needing more power or 5V addressable control, this hub cannot meet those needs.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 90% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | EN-Labs |
| Model name | RGBHUB1 × 7 |
| Product type | RGB Hub |
| Product color | Black |
| Ports & slots | |
| First connector | RGB 12 V |
| Second connector | RGB 12 V |
| Connector count | 8 |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
Questions about this item
Should I pick the 12V AURA hub or a 5V version for my motherboard?
This hub works only with 12V AURA RGB headers; it will not drive 5V addressable RGB devices.
What does the 12V rating mean for my lighting setup?
The motherboard header typically supplies up to 12V/1A, so total connected LEDs must stay within that 12W budget or they will dim.
Which motherboard header standard does the 4-pin RGB connector use?
It uses the standard 12V 4-pin RGB header found on Gigabyte, ASUS, MSI and ASRock AURA boards.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 1.2m internal power cable with dual USB and audio
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





